Common type:

Hw-1.5, hw-3.0, hw-4.5, hw-9, hw-15, hw-22, hw-30, hw-40,

Hw-50, hw-60, hw-70, hw-80, hw-100, hw-120, hw-140, hw-160
 

Product introduction:

1. Spring balancer is designed by our company with advanced foreign technology

Is compatible with the operating toolsThe auxiliary tool used

This series of products use the energy accumulated by the coil spring to make the suspended operating tools

In a weightless state, greatly reducedOperators of the intensity of labor, improve

The efficiency of labor production, therefore, the spring balance is not in the factoryThe lack of

Auxiliary tools.

Spring balancer is suitable for assembly line and various fixed positions

In, the operating tools are more cumbersome to makeUse tools for longer durations.

Widely used in automobiles, tractors, household appliances and machinery manufacturing

Whether in the assembly line or work station, always use manual

The field of tools and equipmentBoth can be used. It can also be used as a supplement to the lifting tool

Tool use. When the tool is heavy, it needs to work frequentlyOccasions,

With the help of the lifting force of the equalizer, the labor intensity can be reduced.

Usage:

1. According to the weight of the suspended object, choose the balancer of appropriate specification. Before the installation

Please read the instruction.
 

2. Suspend the hanger ring of the balancer on the strong beam or joint above the work station;

And note: the user must be secureThe hole is fastened to a beam or joint

Above, ensure absolute safety in use.

3. Lift the operating tool to a position slightly higher than the height of the hook under the equalizer

Hook up to it.

4. Adjust the balance weight of the balancer to the same weight of the tool used or

Slightly larger. Keep the tool up and down arbitraryAll positions are balanced, that is, the tool is in

Weightlessness.

5. When removing the balancer from the tool, all the steel rope of the balancer should be sucked into the tower

Do it behind the wheel just in case you don't pull itCatch the hook under the balancer, causing a sudden discharge

Load, hook quickly retract, causeDamage balance by cutting or slittingDevice.
 

6. Do not leave the balancer empty when it is not attached to the tool

Causing the steel rope to get stuck in the wrong groove.

7. The operating tool moves horizontally, with the Angle not exceeding 45 degrees. The steel rope needs to be moved

Retract near vertical ground.