Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
X Email Mobile

Instruction Manual
Ultrasonic Humidifier; Place the machine flat on the suitable location, remove the lid, turn over the water tank, rotate the bottom cover, and inject pure water or clean tap water, fill the water and cover the lid, wipe the water around. Connect the AC 220V/50HZ power supply, the power light is on, the red light indicates that the water tank is filling water to the water trough, and the green light indicates that the water in the water trough is full, and the machine can work normally. At this time, you can adjust the mist quantity. You can set according to the dryness of your room. When the water tank is empty, the safety device automatically disconnects the atomization circuit, and there is no mist spraying from the outlet at this time, and the red light is on. If you want to continue to use, please turn off the power and re-fill the water tank.
Operating Precautions
Do not add hot water over 40 degrees to the tank or sink, or it may cause discoloration or deformation.
Do not allow water to flow into the body from the outlet, and if there is water on the outside of the body, please wipe it clean with a dry cloth.
When the indoor temperature is below 0 degrees Celsius, please drain the water from the sink and tank to prevent ice formation that could damage the machine.
Please do not put metal items, chemical products, or cleaning agents into the sink, or otherwise, there may be poor fogging performance.
Please do not place the humidifier in a place where strong light and hot air directly radiate.
Do not place the humidifier near the air vent and try to keep it away from furniture and electrical appliances.
Please do not directly add water to the machine's water tank.
Please disconnect the power and unplug the plug when not in use for a long time. [This electrical appliance does not require grounding]
Do not turn off the power when pouring the remaining water from the sink, or the appliance will be immediately damaged.
Safety NoticeItem
Please do not use a wet towel to plug in or unplug the outlet, to avoid the risk of electric shock.
organismTiltPlease turn off the power before handling it.
When turning on the machine, do not touch the ring energy plate with your hands, or you may experience pain.
Do not disassemble the body at will to avoid electric shock accidents.
Please do not replace the power cord at will.
Please do not allow children to operate the machine.
Maintenance and Cleaning
Cleaning of the tank (every two to three weeks))
Unscrew the water tank cover. Use a soft cloth to remove the scale from the tank, and then rinse with clean water.
Sink cleaning (once a week)
If there is scale on the water plants, it can be cleaned with a soft cloth dipped in cleaning agent, and then rinsed with clean water.
"Outside the humidifier.section cleaning"";
After washing the soft cloth in lukewarm water below 40 degrees, wipe away the surface stains, and the spray can be directly washed with water.
The cleaning of the atomization film
If there is scale on the surface of the atomization film, you can drop a few drops of oxalic acid cleaning liquid on the atomization film, wipe it with a cotton swab, and then rinse it with clean water to achieve the cleaning effect.
Update time:
TOP