Infrared night vision Wireless GPS not drilling vehicle wireless rearview camera car camera with night vision

This interface with display and navigation interfaces for interfacing with car DVD please contact customer service

Details:

, Camera parameters
signal barrier-free transmission of 100 metres, 380 lines of resolution image sensors, image chip: VC1/3'' plastic shell and waterproof color CCD designed for outdoor use,

Camera vision angle: 120 degree horizontal field of view; 90-degree vertical angle, high intensity infrared night vision lighting (built-in 8 IR led), 6.8G cushioning, IP66 waterproof level

Plastic brackets, video input: 1.0Vp-p7.5 power supply: DC12V,200mA, transmitting frequency: 2414MHz, operating temperature:-20-60 degrees, is suitable for the

Types of car models, red power wire back up lamp cathode, black reversing lights negative.

Second, receiving the cigarette lighter
Plug-and-play convenience, voltage 12V, current: 150mA, operating temperature-20-60 degrees, sensitivity: -93dbm, video bandwidth: 8.0MHz, accept

Frequency tuning mode: PLL built-in frequency, signal demodulation modes: high-frequency demodulation, RF frequency impedance: 75Ohm, frequency: 480MHz, band width: 18MHz,AV output: composite video;

Installation method (easy to do)

1, take the car
boot of 2, remove the inner layer
3, open the license plate light lamp cover, the camera power cable through the hole into the car license plate lamp
4, camera launch boxes attached to the trunk of a convenient location. (Launch pad placed in the mezzanine of the plates will affect reception)
5, put the camera fixed on the plate
6, camera power cable to the reverse light location, according to the reversing lamps for anode and cathode respectively received the power cord on the power supply
7, no drilling, easy simple (non-professionals, mistakenly wiring without permission)

Map: note launches do not placed inside the sandwich sheet, it will affect the reception.