Welding Gloves

Welding gloves are a welders work gloves, safety and comfort for workers. At present are mainly cow split leather, cow grain leather, pigskin, lambskin natural leather.

Characteristics: primarily thermal insulation, abrasion resistance, prevent spatter burns to block radiation, while a certain degree of insulation.

Welding of different types of resulting effects on welder will not necessarily, so according to all kinds of welding welding gloves can be broadly divided into two classes:

1. General welding gloves of the so-called manual welding is our usual common

This welding electrodes stuck in a pair of pliers. This type of high temperature welding spatter. Therefore use gloves for Gary's double. Lengths in 35CM

2. argon arc welding gloves

Such low welding spatter, high temperatures, strong radiation, wire and relatively thin. So this type of glove hand

Well, relatively thin, not too long.

EN12477: Type a type b

Conductance resistance insulation resistance ≥ ≥ 10^6 10^6 Ohm resistor/ohms

Abrasion-resistant 500 100

Cut resistance index index of 1.2 1.2

Tear-resistant 25 nm 10 nm

Puncture-resistant 60 nm, 20 nm

Resistance to combustion level 3 level 2

Heat-resistant 100 degrees to 100 degrees Celsius

Thermals HTI resistance ≥ 7

Metal slag resistance of 25 15 grains

Dexterity (nail diameter) ≤ 11mm ≤ 6.50mm