Notice:

           If you have interest in my product ,please contact me as follow information:

    Tel:  86 15967970125

          86 57981558575

   Email: rober_929@aliyun.com

   QQ:   2094586019

Pay attention please,  Contact information at the top right is wrong.

Welcome to custom make your own brand

Scope of application:

Metals, rubber, plastics, electronics, jewellery, electrical components, and so on.

Method of use:

1, first clean surface, remove surface dirt, grease, rust and so on, when the metal, the best PACKING, such as PE, PP and PTEE plastics, surface activation first.

2, open the front cover, and tapped her fingers on the tip part, so there is no residual fluid, then the scissors to cut out the hole.

3, was followed by dropping a small drop of glue, instantly and keep up to harden, then size should not be too large, then the layer thickness should not exceed 0.2mm.

4, after use, wipe the container and lid and store in a cool, dry place or refrigerated.

Notes:

1, glue vapors can irritate mucous membranes and eyes.

2, avoid contact with skin and eyes, if by accident, immediately wash with plenty of water and taken to hospital, wash eyes use a dilute solution of sodium bicarbonate.

3, touching hands, SOAP, wash water, washing-up liquid and a pumice stone.

Shelf life: 12 months (20 c)

Part of our products have been displayed on the website, please contact us if you want to know more about the products.