192 console professional light console dmx512 controller

 

 

An Overview

1.1 The Function of the Console

The 192 console is a fully functional, reliable, and stable console. It has the ability to run automatically, voice control, and MIDI programming. It is suitable for use in various professional and non-professional settings.

1.2 Features

1) The console has 192 continuous editing channels.

2) Each mini-program (BANK) can edit eight separate scenes (SCEN), and there can be a maximum of 30 such mini-programs (BANK). Multiple mini-programs (BANK) can be placed in a large program library (CHASE), with a maximum of 30 such mini-programs (BANK).

3) There are eight adjustable potentiometers to adjust the output size of the corresponding channel.

4) Built-in microphone, can voice control to trigger the programmed procedures.

5) When the program is automatically running, adjust the SPEED and FADE TIME knobs to set the program's running speed and delay time.

6) Has a MIDI interface, which can provide MIDI signal control.

7) Four-digit LED display:

The first digital display shows the large program (CHASE)

The second digital display shows a separate scene (SCEN)

The third and fourth positions display the mini-program (BANK).

8) The function of shutting down the channel output (BLACKOUT) can be manually operated by pressing the button on the panel or controlled by MIDI signals.

9) The operation of the large program (CHASE) can be performed by pressing the buttons on the panel or by calling it with a MIDI signal.

10) Output delay function, adjust the scene's delay time with the FADE TIME potentiometer.

11) DMX signal polarity can be selected.

1.3 Unboxing Check

When unboxing, check if the machine has been damaged in transit. If you find any damage, please notify the transportation company immediately and retain the damaged packaging as evidence. This will help the transportation company confirm the damage. If necessary, our company is willing to assist with any related matters.

1.4 Packing List

(1) 192 control console 1 set

(2) Control console power supply 1 piece

Instruction Manual for 192 (1)

 

Panel Introduction

The panel is shown in Figures 1 and 2.

 

Lamp area, a total of 12 lamps. Each lamp should have 16 channels, divided into A and B pages.

2 separate field areas, 8 scenes (SCEN) for a mini program (BANK).

3 7-segment display.

The 4 small program (BANK) up and down button. A total of 30 BANKs are available for users to use.

The 5 program library area (CHASE) has a total of six program libraries. Each program library (CHASE) can hold up to 30 small programs (BANK) for a total of 240 separate scenes (SCEN).

Press the BLACKOUT button to turn off the output of the 192 channels on the control panel.

Press the PROGRAM button on the 7-segment editor for a long time until the PROGRAM indicator light blinks at the bottom left of the display, then enter the editing program state.

8 MIDI地址选择和存储场景按键:

When in editing mode, first press this button, then press the scene (SCEN) you want to store to activate the storage scene function.

When running the program, press and hold this button until the display on the right side of the screen flashes. Use the BANK button to scroll up and down to select the MIDI channel (1-16), and then hold down the MIDI/ADD button to exit and save the MIDI channel setting.

9 TAPSYNC/DISPIAY button.

When an automatic running program is running, the time interval between the last two key presses is the program's running speed.

When b is not running, pressing this button can switch the maximum channel number to 100 or 255.

10 AUTO/DEL按键.

After the editing program completes its exit, you can click this button to call out the edited program by using the BANK up and down keys, and the edited program will automatically run.

In editing a program, you can delete unnecessary and bad scenes.

11 MUSIC/BANKCOPY button.

After the editing program completes its exit, you can click this button to call out the edited program by using the BANK up and down keys, and trigger the running of the edited program with voice control.

In the process of editing a program, you can copy all the scenes of a small program (BANK) to another BANK.

The 12 FADETIME push rod can be used to adjust the delay time of the scene in the program when the program is running automatically.

The 13 SPEED push rod can be used to adjust the scene running speed of the program when the automatic running program is in operation.

The 14 page-turn button, when editing and manually, allows you to turn the page and operate different channels through this button.

15 push-pull regions, with eight adjustable potentiometers.

16 Console Power Switch.

17 MIDI interface.

18 DMX Polarity Converter Switch.

19 DMX signal line interface

20 Power Connector

 

Three - Editing the Program

Connect the parts of my company, and then turn on the power.

Long press the PROGRAM button until the indicator light blinks at the bottom left of the display, then enter the program editing state.

Click on the lamp you want to edit under SCANNERS, and the corresponding indicator light will turn on.

Adjust the BANK up and down flipping key, start editing from the first BANK, and the display shows *01.

Adjust the middle push to the ideal state as a scene.

Click the MIDI/ADD button six times, then click the first button under SCENS, and the indicator lights on the entire panel will flash. The display will show 101, indicating that the previously edited scene has been remembered.

The other 2-8 scenes in the first BANK, repeat the above 4, 5, 6 operations, but in the 6th step, click the 2-8th buttons under SCENS respectively.

Edit the eight scenes in the second BANK, first adjust the BANK up and down flipping key, and the display will show at *02.

Repeat the steps 5, 6, and 7 above to complete the editing of the second BANK.

The 10th to the 30th BANK, and so on.

Press and hold the PROGRAM button for 11 seconds until the BLACKOUT indicator light flashes at the top left corner of the display. Then, click the BLACKOUT button at the bottom right corner of the panel. When the indicator light goes out, you will exit the editing state.

 

The Editing of the CHASE Program Library

1. Press and hold the PROGRAM button until the indicator light flashes at the bottom left of the display, entering the editing state of the program.

Click the first CHASE button to edit, and the display shows 1***.

3. Press the BANK button to scroll through the banks, select the bank you need. For example, if you select the first bank, the display will show ***1, and if you select the second bank, the display will show ***2.

Click the MUSIC/BANKCOPY button, then click the MIDI/ADD button. The entire panel's indicator lights will flash, and the selected BANK will be saved into the first CHASE.

Deposit the other BANK into the first CHASE, and perform the same steps 2-4.

A CHASE can hold up to 30 different BANKS.

Long press the PROGRAM button until the BLACKOUT indicator light flashes in the upper left corner of the display, and then click the BLACKOUT button in the lower right corner of the panel. When the indicator light goes out, it exits the editing state.

 

Modify the scene SCEN in BANK

1. Press and hold the PROGRAM button until the indicator light flashes at the bottom left of the display, entering the editing state of the program.

2. Press the BANK button to scroll through the banks, select the bank you need. For example, if you select the first bank, the display will show ***1, and if you select the second bank, the display will show ***2.

Click on the SCEN scene that needs to be modified, and the scene will be called out and displayed.

4. Select the required lighting fixtures under SCANNERS.

Adjust the scene to the ideal state by pushing the lever in the middle of the panel.

First, click the MIDI/ADD button, and then click the current SCEN button. The entire panel indicator lights will flash, indicating that the current scene has been modified and stored.

Step 7: Then you can modify other SCENs that need to be modified. The operation is the same as steps 2, 3, 4, and 5.

Long press the PROGRAM button until the BLACKOUT indicator light flashes in the upper left corner of the display, and then click the BLACKOUT button in the lower right corner of the panel. When the indicator light goes out, it exits the editing state.

 

Six - Delete the scene SCEN from BANK

1. Press and hold the PROGRAM button until the indicator light flashes at the bottom left of the display, entering the editing state of the program.

2. Press the BANK button to scroll through the banks, select the bank you need. For example, if you select the first bank, the display will show ***1, and if you select the second bank, the display will show ***2.

Click on the SCEN scene that needs to be deleted, and the scene will be called out and displayed.

First, press the AUTO/DEL button, and then click the delete scene SCEN. The entire panel indicator light will flash, indicating that the scene SCEN has been deleted.

Step 5: Then, you can delete any other SCENs that need to be removed. The operation is the same as steps 2, 3, and 4.

Long press the PROGRAM button until the BLACKOUT indicator light flashes in the upper left corner of the display, and then click the BLACKOUT button in the lower right corner of the panel. When the indicator light goes out, it exits the editing state.

 

Run a BANK

1 In the initial state of the console, use the BANK button to scroll up and down to select the BANK to run.

Click the AUTO/DEL button, and when the indicator light on the bottom right of the display screen is lit, the BANK will automatically start running. You can adjust the speed and delay time of the BANK by pushing the SPEED and FADE TIME knobs at the bottom of the screen.

Press the MUSIC/BANKCOPY button at 3 o'clock, and if the indicator light on the top right corner of the screen lights up, the BANK will be triggered to run by voice control. The speed of the operation is controlled by external sounds.

Click the AUTO/DEL or MUSIC/BANKCOPY button again. If the display screen does not have a light, it will exit the BANK operation mode.

 

Run a program library

1 In the initial state of the console, click on the CHASE you want to run, for example, to run the first CHASE, the display screen will show 1***.

Click the AUTO/DEL button twice, and if the indicator light on the bottom right of the display screen turns on, all the CHASE BANK programs will run in the order of COPY. You can adjust the running speed and delay time by pushing the SPEED and FADE TIME knobs at the bottom of the screen.

Click the MUSIC/BANKCOPY button three times, and if the indicator light on the top right corner of the screen turns on, all BANK.CHASE functions will be triggered by the CHASE voice control. The speed at which the CHASE runs is controlled by external sounds.

Click the AUTO/DEL or MUSIC/BANKCOPY button again. If the display screen does not have a light, it will exit the BANK operation mode.

 

Setting the MIDI Address of Nine

1 In the initial state of the console, press and hold the MIDI/ADD button until the display flashes twice at the back.

Press the BANK button to flip through the numbers, select between 1-16. If you want to set it as the first address, simply flip to **01.

Press and hold the MIDI/ADD button for 3 seconds, until the display no longer flashes. This will exit the MIDI address setting and save the last setting.

 

Ten MIDI controls for the console

Set the MIDI address of the 192 console to match that of the MIDI controller.

Connect the MIDI cable well.

Press the MIDI button 3 times, and each note key corresponds to a scene in a BANK. Press once to call out this scene SCEN, and press again to close this scene SCEN.

Four consecutive notes correspond to consecutive scenes, one-to-one, and the 126th note is the BLACKOUT function.