Scope of Application:Suitable for industries such as protection against dust generated during operations in hardware, glass, cement, construction, building materials, stone mining, textiles, machining, hardware casting, electroplating, painting, electronics, pharmaceuticals, pesticides, material processing, and grinding.Activated carbon filtering masks are more suitable for dealing with unpleasant odors after new house renovations, vehicle exhaust, painting work, and other situations.
Product features: 1. Equipped with an automatic breathing valve that reduces heat and moisture accumulation, providing a more comfortable breathing experience; suitable for long-term use in high-temperature and high-humidity environments. 2. High-efficiency activated carbon can block organic odors, such as formaldehyde from renovations, paint smell, gasoline smell, and other organic gases. 3. Made using non-toxic, odorless, non-allergic, and non-irritating raw materials; features a high-efficiency electrostatic filtration layer with a filtration rate of over 95%, reaching up to 99.7%, low resistance, and efficient breathing performance.Chang. 4. Adjustable nose clip and built-in nasal bridge foam pad, suitable for various face shapes, secure and comfortable. 5. Adjustable nose clipImproves the seal between the mask and the face, effectively blocking dust.6. The filter particles of the mask material use N9.5 grade, and the filter layer is made of high-efficiency melt-blown material to filter dust that is not easily visible to the naked eye.Effectively filter and absorb extremely fine harmful industrial dust, preventing silicosisSARSAvian Influenza.t_7Using polymer dot molding technology,It undergoes ethylene oxide sterilization and disinfection before leaving the factory.
Instructions and Reminders
1.Please wear your mask properly and check its airtightness before entering the polluted area.
2.If the user feels increased breathing resistance, or if the mask is contaminated with blood stains or other foreign substances, it must be replaced immediately.
3.This mask shall not be modified or cleaned.
4．Masks should be stored in a clean environment to prevent damage, dirtiness, dust exposure, direct sunlight, high temperatures, and contamination by harmful chemicals. When storing, it is also important to avoid deforming the masks (it is not recommended to use them for too long, repeatedly disinfecting, or using them for extended periods, as their protective effect will gradually diminish.)
5.If the mask is contaminated, such as with blood or droplets and other foreign substances, it must be replaced immediately.
6.If you experience dizziness, difficulty breathing, or any other physical discomfort, please evacuate the contaminated area immediately.
7.This mask does not produce oxygen, and cannot be used in an environment where the oxygen concentration is below 17%. It can only be used in well-ventilated areas.
Wearing Instructions
1On the side of the mask without the nose clip, place the nose clip above the mask.
2．Press the mask against the chin, pull the lower strap over the head, and place it below the ears at the back of the neck.
3．Pull the headband above over the head and place it behind the neck, above the ears.
4．Place the middle fingers of both hands at the center of the metal nose clip, then press them toward both sides along the shape of the bridge of the nose onto the face until it is fully shaped like the bridge of the nose.
5．Before entering the work area, it is necessary to check the fit of the mask and the face
About Us: All products can be negotiated based on quantity. Address: G2-1 4596, Gate 4, 2nd Floor, Street 11, Yiwu International Trade City. Phone: 13575964833, QQ: 2838055377, 947711612, 923287576
Finding high quality products in Yiwu
China, Yiwu China Commodity Market (Yiwu wholesale market), the
World's Largest Commodities Trading Center Online.
