【Product Name】Car Battery Clamp

【Product Material】PP

【Product Weight】0.45kg

【Product Category】High-end car seat cushions

Product Specifications：100Aand200Aand300Aand400Aand500Aand600Aand1000AWait

【Usage Instructions】：

1. The following are the connected programs:
(1First, clamp the red wire of the start line.“Rescue vehicle"The red battery positive terminal is above.

(2Then clamp the other end of the red wire.“rescue vehicle”The red battery positive terminal is above.

(3Clamp the black wire.“Rescue vehicle'On the black negative battery.

(4Then clamp the black wire."rescue vehicle"On the black negative battery.

(5Start first."rescue vehicle"First, turn on the engine, and then start it."Rescue vehicle"The engine. If the rescued vehicle still cannot be started,

Please check if the metal contact parts are not in good contact.

Note: After starting the engine, it is still necessary to remove the starting jumper wire in order, or there may be a risk of a short circuit.

Steps for Disconnecting Wiring:

(1"Firstly, put"Rescue vehicle"Remove the black wire.

(2Then again"rescue vehicle"Remove the black wire.

(3）然后将"rescue vehicle"Remove the red wire.

(4Finally, put"Rescue vehicle"Remove the red wire.

This model500ABattery cables are exported for packaging.

【注意事项】：

1When the car's battery is dead and it cannot be started, it can be used to start another vehicle by connecting to its battery. The bold battery jump start wire,

Maximum Passing Current500AMP，一般适合排量在2500cc以内的汽油发动机或者排量在2000ccwithin" 或者 "within the range of

The use of diesel engine batteries.

2Two cars must not have any contact, and the electronic systems of the two cars need to have the same voltage. If the battery is frozen, please do not

Use this startup wire.

3Before connecting, the engines, sound systems, and air conditioning of both cars need to be turned off.