Product Introduction:

This product uses high-tech heating elements, which heat up quickly and maintain a constant temperature automatically to prevent overheating and damage to the glue gun. It has low energy consumption and a long service life.

The shell and the mechanical components use imported engineering plastics, which are resistant to wear and less likely to break.

The internal structure is scientifically designed, with high efficiency and a comfortable grip that is less prone to fatigue.

The product has passed the 3750V/minute high-voltage test without breaking before leaving the factory. It is equipped with a built-in safety fuse to ensure safety in use.

Product Application

Handicrafts, Wooden Products, Decorations, Electronic Circuits, Toy Models

Usage Method:

1 Insert the adhesive tape from the tip of the glue gun into the tube.

Turn on the power and preheat for 3-5 minutes.

Press the trigger three times to eject the adhesive and you can control the amount of adhesive by yourself.

4 After use, turn off the power, but do not remove the unused adhesive tape, otherwise it will damage the glue gun.

Notes

1. This product uses rubber strips with diameters between 10.6 and 11.8, and using non-standard rubber strips may damage the glue gun.

 2. In the process of using a glue gun, it should be properly supported on the work surface by using a stand.

3. After the glue gun is powered on, the heating part and the glue liquid will be hot, so please do not touch it.

4. After using the glue gun, it should be allowed to cool naturally before placing it in a well-ventilated and dry area where children can easily access.