kai ming plastic-envelop machine pouch laminator laminator photo photos plastic-envelop machine

 Operation process;

  1.Preparation work; plug the cord into the power outlet and turn on the power switch, the motor will start working.

  2.Temperature setting; turn on the heating switch, the temperature will rise rapidly, set the knob to the temperature position required for plastic sealing, preheat.3About a minute later, the constant temperature lamp began to flash, repeating the bright and dim pattern.-Dark change, this means the machine's internal temperature control system is heating up.-The switch to stop heating is normal.

  3.Sealing; insert the required sealed cards into the card protection film, and insert the sealed end into the machine. Make sure it is placed within the two edges of the card board.

  4.Sealing temperature; at25At room temperature, the thickness of the protective card film is0.05mm为110"度"在中文中通常指的是“度量”，例如温度、角度等。如果您指的是其他含义，请提供更多的上下文信息。0.07mm为140"度"在中文中通常指的是“度量”，例如温度、角度等。如果您指的是其他含义，请提供更多的上下文信息。0.1mm为170Degree, according to the size of your card membrane.Thickness.Adjust the material accordingly.

  5.Attention; If the temperature is too low, the card may become blurry. You should increase the temperature. If the temperature is too high, it may cause wrinkles on the protective card film. You should decrease the temperature.

  The 320 gusset machine is equipped with a large motor, large rubber rollers, seven iron gears, a metal casing, and can heat up quickly and maintain a stable temperature. It has excellent gusseting effects and can advance and retreat cards. It is a temperature-adjustable gusset machine.