[Characteristics] of:

1, the product adopts imported SMD chip, shape design of ultra-thin makes installation fitting better, more uniform lighting, avoid the disadvantages of point light source irradiation width brings bad; products suitable for the use of 10-13V voltage. The SMD light source products diffusion, wide-angle irradiation, high luminance characteristics;

2, light light without delay, high purity, color and strong penetrability;

3, using LED light emitting diode, small power consumption, the automobile circuit can better protect;

4, LED has no filament, good heat dissipation, the current is small, small quantity of heat, the circuit of the vehicle is not easy oxidation;

5, strong shock resistance, low temperature rise, is a new generation of solid state light source with revolutionary;

6, applicable to DC 1013V.

[note] products:

No need to modify the circuit, directly replace traditional glass bulb, pay attention to the original bulb temperature is relatively high, to prevent burns!

When installing the product dimensions pay attention to installation position with reference to the size of the space, carefully press, do not squeeze the LED chip, so as to avoid damage. LED has positive and negative polarity, not bright, re install direction;

[Characteristics] LED:

1 can directly replace the original vehicle conventional tungsten light bulbs;

2.LED luminous high purity, without shade filter, wavelength at 5 nm or less error

3.LED light without delay, conventional tungsten light bulbs have a delay of 0.3 seconds.

4.LED low power consumption, the traditional lighting brightness to the same time, the power consumption is only 6% of traditional light bulbs, at the same time also played the role of electricity saving!

The 5 has a long life, its no filament structure does not heat, under normal circumstances the use of up to 6 years

6.LED lamp can make the vehicle control circuit is not easy to be oxidized, maximum load current of 0.1A

6%, also play a role in saving fuel!
5.has a long life, no filament structure does not give off heat, up to 6 years under normal use conditions
6.LED lights vehicle control circuit can be easily oxidized, 0.1A Max load current