Super load bearing, repeated use - strong paste

Strong stick, is a new type of static seal, it can use of electrostatic, produces strong adhesion to metope, etc, and when it and metope is seamless joint, using the principle of air pressure, firmly adsorbed on the wall, can withstand the strong tension and not fall off.

Remind: before installing again please use 20-30 ℃ warm water cleaning electrostatic stickers, and clean.

The auxiliary film can be used on fine grain, frosted, board surfaces.

Wipe clean the surface to be installed, tear off the protective paper, affix the auxiliary paste, and then use the sucker product, firm, convenient and fast.

Electrostatic membrane is a kind of coating film, mainly PVC material, electrostatic adsorption on the product itself to stick the protective items, more commonly used in the adhesive or glue on the surface of the residual is more sensitive and more used in glass, lens, highlights the plastic surface, acrylic, etc. Very smooth surfaces.

Change at will, can use repeatedly, metope leaves no mark

When you want to change hook position, need to lift gently from a corner only, can take down strong stick namely, metope does not leave any trace. After the removal of the strong paste rinsing and drying, can be used dozens of times.

(strong paste is soft material, do not deliberately pull and rub, will affect the use effect)

This product comes in four packaging forms:

Bulk: 48 barrels per barrel, 6 barrels per box, 6 colors per barrel average mix.

Single blister paper card packaging: a case of 384 pieces.

Three PVC boxes: 150 boxes in one box, mixed in 3 colors.

Six PVC boxes: one box of 80 boxes, each box of 6 colors mixed.