[] gifts

to buy the machine, the package will package, give the value of 160 yuan gift package, beyond you, try machine practiced hand opportunity for you to avoid wasting your own supplies. We have a full set of heat transfer solutions, so that the novice is not worried, so that the beginning becomes simple, so that it is easier to start.

> > product introduction:
Name: high pressure machine second generation
model: STC-SD05

> > technical parameters:
voltage: 110V/220V
power: 2200W
temperature range: 0-399 degrees
time control: 0-999ses
do} table size: 38*38cm packing size: 73*48*43.5cm

weight: 25kg

> > digital control system features -
, high accuracy (1 c), and a fine adjustment knob;
- full digital display, high accuracy for time;
- heat pipe and the heating plate as a whole, safe and durable heat uniform heating, thermal conductivity and strong ;
- heating plate peptide fluoride anti sticking coating;
- floor mounted high temperature silicone foam;
- adjustable pressure, Easy to operate.
- beautiful appearance, small and exquisite, effectively improve the work efficiency

> > application
this machine can be sublimation, solvent printing ink color picture by heat transfer in cotton, linen and fabric, but also for screen printing, paste, foam printing process such as heat treatment, can also be color color, portrait, landscape pattern such as baked in porcelain plate, sheet metal, especially suitable for making medals, commemorative card, tombstone, like T-shirts, economical and practical

> > 1.
operation process Hand power, start the power switch, power indicator light;
2. Adjust the temperature regulator to the required temperature, when temperature reaches the set temperature, the thermostat indication light is extinguished, then starts to work;
3. The timer to time;
4. The clothes flat on the heating plate, stacked on the hot, (please note that the hot, positive and negative), press the handle down, until the end, when the set time;
5 instructions stamping when the alarm (buzzer), the handle to the original place.

> > note:
1. Ground protection must have a suitable and reliable;
2. Don't force more than 30KG, so as not to handle deformation;
3. Please note that the stacked hot, and hot, the painting. Using one of the world's most advanced technology of digital TV
mobile TV, and compared with the previous analog TV, digital TV image stabilization, vivid colors, clear picture, not exist ghosting caused by multipath reflection, and signal attenuation caused by the picture distortion, also received high sensitivity, strong anti-interference ability. Due to the adoption of wireless receiver, program content timeliness and other play equipment compared with obvious advantages. In the state of cooling to tear off hot, please use the eraser, the hot, balanced brush,
5. Wait 5-10 seconds, it will be hot,
tear; 6. In the heat state need to tear out hot, hot stamping, please immediately after the ironing paper torn off;
7. The effect of stamping temperature, time and pressure to correct with each other, type and thickness of materials and hot, the clothes can affect the heat transfer effect;
8. The company has all kinds of hot, with
9.; Sample test before batch production.

> > maintenance:
1. Pressure: if the pressure is not enough or too much, please loosen the pressure regulating screw, and then rotate the pressure regulating nut to adjust the size of the pressure, adjusting the pressure screw lock tight after
2.; Temperature: when the device reaches the set temperature after heating plate heat, please check and confirm the controller wiring thermocouple is damaged (thermostat at 0 DEG to 180 DEG C in about 5 minutes);
3. Time: when time does not alarm (buzzer sound alarm (buzzer) or continuous stop), micro switch contact points, please check the box if the distance is moderate, if there is a please adjust to the appropriate position; this machine adopts greedy eccentric bearing structure, no pressure adjustment is too large, so as not to damage the bearing;
4. As a result of quality problems, please contact the person in charge of. with the company technical department