24 pieces/case, case size 52*39*39, weight 21/22


【This model's advantages】

The new three-in-one metal air pump is not in the same category as plastic air pumps. It inflated quickly and quietly. Please consumers pay attention to distinguish (the power of plastic air pumps is small, and the noise is very large, the power is generally only 3-40W, while the power of metal air pumps is generally over 90W, the air filling speed is more than 3 times that of plastic air pumps).

2. Compact in size, attractive in appearance.

3. Fast air pressure, a flat tire can be fully inflated in 5-7 minutes.

6. Bicycles, motorcycles, sports balls, and airbeds can also be inflated.

Barometer: 260PSI

The main material of the body is metal and plastic.

【Usage Method】Remove the cigarette lighter plug and directly plug it into the car's cigarette lighter. Turn on the air pump switch, and wait for the air pump to start. Then, insert the air nozzle at the top of the air hose directly into the tire valve. When you hear air leaking from the tire, it indicates that the air is flowing. You can tighten the air nozzle and begin to inflate the tire. At this point, the air should no longer leak.
When inflated, the instrument pointer rises with the saturation level of the tire. When the pointer reaches the appropriate tire pressure (generally for car tires, 223kpa=35PSI), remove the plug and air nozzle, and the job is complete.
Please connect the professional ball needle and nozzle provided with this machine to the air nozzle, and use it to inflate sports balls and other equipment that require air.

【Notes】1. Please start the car engine before use to enhance power, and it does not consume the car battery power.

2. This machine is limited to use a direct current (DC12V12A) power supply and cannot be used with household high-voltage power.

3. When inflated, please take a 10-minute cooling break after continuous operation to extend the motor's lifespan. For rubber boats, you can continue to operate for 30 minutes.

4. Generally, it takes about 3-6 minutes to reach a normal tire pressure of 220KPA when inflated. Large tires will take longer. If the gauge needle rapidly rises when starting to inflate, it indicates that the air has not been properly pumped into the tire. You must stop the operation and start over, or the gauge and motor may be damaged.

5. When using, do not leave the machine unattended, always pay attention to the tire pressure, and do not allow it to be too saturated.

6. If the car's ashtray is not clean and non-conductive, or if the fuse burns out, the machine cannot operate normally. Please ensure that the ashtray is conductive.

7. This machine should be avoided from moisture, heavy falls, and sand and mud intrusion. It should not be played by children to prevent damage.

8. If there is a stoppage during use, it is due to the insufficient current supplied by the cigarette lighter. Our products are shipped with a current detection of over 12A.

This machine is suitable for the tires of cars, bicycles, and also for the inflatable of sports balls, rubber boats, and so on. It has a wide range of applications.
On highways, in the wilderness, or anywhere, a car tire suddenly losing air can more effectively perform its emergency function.
Always ready to carry one, placed in the trunk of the car, does not occupy space, and has endless uses.
Car tires should always maintain the correct tire pressure to save gasoline, protect the tires, and ensure road safety.

Unit conversion: 1 kg/c㎡ = 0.98 bar = 14.2 PSI (1bf/in²) = 98.0665 kPa

1 atmosphere = 1.03327 kg/cm²

Note: Some air pumps claim a pressure of 300PSI on their pressure gauges, but this is merely to attract attention. In reality, it is impossible to achieve such high pressures (equivalent to 20 atmospheric pressures). Typical tire pressures are around 2.3 bars, which is roughly 35PSI. The maximum pressure that an air pump can typically achieve is between 7-10 bars, or about 100PSI. Since these products are exported, they are packaged in neutral English.

Tire Model Air Pump Instruction Manual

1. This machine is suitable for tires, inflatable beds, sports balls, and rubber boats of cars, trains, bicycles, and inflatable toys, with a wide range of applications. It has a fast inflatation speed and stable quality.

2. When your car tire suddenly loses air on the highway, off-roading, or anywhere, the tire inflation can be used to quickly inflate the tire to the specified pressure in just 2 minutes. Then you can drive to your important business or to a tire repair shop without worrying about delaying your valuable time.

3. Maintain the correct tire pressure of your car at all times to save gasoline, protect the tires, and ensure road safety.

4. The design of the internal wire management in the entire machine is clever and saves space.

5. The design is novel and beautiful, and it is convenient and lightweight to carry.

Usage Method:

1. Insert the tip of the rubber hose into the air valve of the tire, and when you hear the sound of air escaping from the tire, it indicates that the air is flowing. Then, tighten the air nozzle.

2. Remove the plug and plug it directly into the cigarette lighter.

3. Start the car engine, turn on the air pump switch, and you can begin to inflate the tire. The best continuous inflation time should be within 15 minutes. If necessary, you need to wait for the air pump to cool down before recharging.

4. When inflated, the instrument's needle will rise with the actual tire pressure. When the needle reaches the appropriate tire pressure (the standard pressure for front and rear tires is indicated on the driver's door frame or inside the fuel cap), turn off the switch, pull out the plug, and the inflation work is completed.