welding wire solder wire sol furnace kena brand solder roll

Kena solder wire features excellent brazing performance, bright solder joints, reliable connections, and low corrosion properties. It is the most widely used active solder wire in the electronics industry. It is suitable for brazing in electronics, instruments, household appliances, and printed circuit boards. Diameters available: 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.3mm. Weights per roll range from 80 grams, 100 grams, 150 grams, 200 grams, 250 grams, 500 grams, and 1000 grams. Custom sizes can also be provided according to customer requirements. Price to be discussed further.

1. It must not be used in environments with flammable and corrosive gases.

2. Do not tap randomly, otherwise the lifespan may be reduced due to contact with the wire.

3. After being used several times, the copper rod should be removed to remove the oxide layer, to prevent the problem of difficulty in removal over time.

4. Do not place the soldering iron in a damp area to prevent moisture-induced electric leakage.

5. Use a 220V±10% AC power supply. When connecting the power cord handle, do not allow the cord to rotate with the handle to prevent short circuits.

6. The insulating layer of the power cord should be replaced promptly if damaged, to ensure safety.

7. The power cord is a three-conductor soft cable with grounding, and it must be grounded during use.