Manual Welding Gun, manual Tin Gun, manual Tin Gun

1. The solder gun features a lightweight mechanism design, making operation easier.  

2. The rubber shell of the manual solder gun is made of alloy material, which is resistant to wear, and it comes with a high-quality heating core, resulting in a longer service life.  

3. The soldering iron tip and heating core of the manual solder gun are easy to replace, the operation is simple, and welding tasks can be completed easily.  

4. The wire diameter specification for the manual solder gun is: 0.7–2.3 mm.  

5. Power options: 30 W manual solder gun, 40 W manual solder gun, 60 W manual solder gun, 80 W manual solder gun, 100 W.





Product applications: wire welding, electronic component soldering, circuit board soldering, electronic and electrical repair, etc.



	1. It must not be used in environments with flammable and corrosive gases. 


	 


	2. Do not tap randomly, otherwise the lifespan may be reduced due to contact with the wire. 


	 


	3. After being used several times, the copper rod should be removed to remove the oxide layer, to prevent the problem of difficulty in removal over time. 


	 


	4. Do not place the soldering iron in a damp area to prevent moisture-induced electric leakage. 


	 


	5. Use a 220V±10% AC power supply. When connecting the power cord handle, do not allow the cord to rotate with the handle to prevent short circuits. 


	 


	6. The insulating layer of the power cord should be replaced promptly if damaged, to ensure safety. 


	 


	7. The power cord is a three-conductor soft cable with grounding, and it must be grounded during use.