"Product name" mini jewelry scales

"Product number" AK-100
"material" stainless steel + plastic
"colour classification" figure
"product" 85*46*20mm

"Scale sizes" 45*34mm
"product range" 100g
"precision" 0.1g
"weight" 56g
"product accessories" jewelry scale 1, 2 batteries, 7th match, in Chinese or English instruction manual 1
function description:

Baby Description:

Features: 1) the wide range and high precision, Taobao said gem;

2 ) high sensitivity, fast response, the scales the weight of the imported transducer, reflecting the faster and accurate returns to zero;

3 ) stainless steel scale face;

4 ) correction method is simple and takes only a few simple operations, scales can be calibrated very accurate;

5 ) power, replacing more convenient;

6 ) backlight function of auto power off, power off automatically when idle;

7 ) peeled and 4 kinds of unit conversions, g (g regular units), CT (Carat), Oz (ounce), DWT (Troy) is an optional feature.

First, the instructions: put the battery in battery compartment indicates the correct mounting, place the scale body in steady, wind-free table.

• Press power button to boot, wait for three seconds to display0.1or0.01;
• Will have to weigh items on the scale, numerically stable readings;
• Press the unit key to change units of measure;
• Power on press power button off.

Second, the deduction

• Boot as described above;
• Place the buckle weights on the scale;
• Peel display0.1or0.01, indicates a deduction;
• And then add the weighed items

Third, correction

1, power on zero;

2, hold the unit conversion button until displayCAL, in the unit conversion button is pressed, then flashing weight value.

3, will be the appropriate weight in scale Central, later, showPASS, and then display the weight value, calibration is complete, after you remove the weights, you can carry out weighing.

Four, troubleshooting

Weighing the primary factor for inaccuracy or failure low battery, incorrect calibration, overload or operate on non-level surface. Please note that the above mentioned several points, with correct use and maintenance of your product.

• Do not display or displays a low battery symbol[LO]battery needs to be replaced;
• [EEEEE]Overload, overload items should be removed immediately;
• [o-ld]Because the error that scales the internal core part is damaged (for example, impact, dropping or overload), please try the calibration again, if the sensor is not severely damaged, then recalibrate after use.
• Display88888, in one plane of vibration, stability work.

Matters needing attention

• Weighing of this product do not exceed the maximum amount of drive+2%.
• Permanent damage of the product.
• The product is not exposed to very cold or very hot environments, this product is in a normal environment can work very well, before using it, to adapt product in a new environment for at least an hour.
• Before using it, power on the scale's internal components warm up scales weighing times, this makes weighing precision.
• Place the product in a clean environment, dust, moisture, vibration and air, or electromagnetic interference may have adverse effects on the stability and accuracy of the product. Gently, weighing objects when gently placed on the scale, so as to avoid inaccurate weighing or damage the scale's internal components.
• Because the product is a high precision products, so it is very careful handling to avoid vibration or falling.
• Horizontal use without wind.

• Tel: 0086-579-85184955
• Mobile phone: 13858915410
• Fax: 86579 85184955
• Add: Yiwu international trade city, Yiwu, Zhejiang, China G2-14955
• Company home page: http://www.ywscale14955.CN.Alibaba.com