ARM Sphygmomanometer Household Manual Sphygmomanometer Portable Sphygmomanometer with Factory Direct Sales

Product Features:

Sphygmomanometer with single-head stethoscope, measuring range: 0-300mmHg Accuracy: +/-3mmHg (0.4kPa) Minimum scale: 2mmHg 2023 Nylon bandage, with D ring, 48*14 or 51*14cm 053.2 Latex bag 22*12cm 069 Leather bag

Packing: Individual color box, 50 pieces/case Gross weight: 26.5KGS/ 箱体积: 55*40*39cm/箱" Translation: ".5KGS/ Case Volume: 55*40*39cm/Case

A blood pressure monitor is a diagnostic instrument used to measure human blood pressure. It has the characteristics of small size and portable, and the effect of use is the same as that of a mercury column blood pressure meter.

Measurement of Blood Pressure:

1. Blood pressure should be measured in a quiet environment.

2. Because human blood pressure varies throughout the day, it should be measured at the same time every day.

3. The subject should maintain quietness in a relaxed state and avoid talking or moving around.

4、It is best to wear loose-fitting clothes.

【Measurement of Blood Pressure: Important Considerations】：
   Blood pressure should be measured in a quiet environment. Because blood pressure varies throughout the day, it is best to measure it at the same time every day. The person being measured should be relaxed and remain quiet, avoiding conversation and activity. It is best to wear loose-fitting clothing.
【Measurement Method】：
   1. Before using the blood pressure monitor, perform a check to ensure that it is functioning normally. The monitor should be set to "0" when not in use, and it should respond flexibly when pressurized and return to the "0" position. 2. Please have the subject sit next to the table, place their left arm lightly on the table, and maintain a comfortable posture. 3. Adjust the arm to be at the same height as the heart, if the height is insufficient, add a soft pad under the arm. 4. Spread the arm band flat, with the center of the air belt facing the brachial artery, and secure the lower edge of the arm band to the upper arm, 2 to 3 centimeters above the elbow crease. It should not be too tight or too loose, generally allowing for two fingers to fit underneath the band to ensure accuracy. 5. Insert the stethoscope's earpiece into the arm band and place it on the brachial artery at the elbow. 6. Slowly inflate the latex balloon into the arm band, while paying attention to the listening, and wait until the brachial artery pulse disappears before increasing the pressure by 2 mmHg.5kPa 4kPa 20mmHg 30mmHg Stop inflating. 7 After the pressure is stopped, slowly release the air from the cuff at a rate of 0.3kPa/s, 0.6kPa/s, 2mmHg/s, or 4mmHg/s, to allow the blood pressure gauge needle to gradually fall. 8 The pressure value indicated by the gauge at the first pulse sound heard through the stethoscope during the falling process is the systolic pressure. 9 When the pulse sound gradually increases and then turns into a murmur, the sound suddenly becomes dull and gradually disappears. When the sound is no longer heard, it is the diastolic pressure.

   *When measuring blood pressure, it is generally recommended to repeat the measurement 2 to 3 times and average the readings to obtain the blood pressure value.

   The back of the blood pressure monitor's case is equipped with metal hooks, which can be used to hang on a cuff for easier reading.

    The blood pressure cuff arm band has nylon buckles, and the binding is convenient and simple.