led car lamp bulb t10 width lamp super bright daytime running lamp license plate decorative light small light modification

【Product Name】: High QualityT10 5-head/9-head/13-head 5050 three-core SMD LED
【Product Voltage】：12V DC (which is the output voltage of a typical car)
【Product Use】:The following are the translated results: - 示宽灯: Turn signal lamp - 阅读灯: Reading lamp - 牌照灯: License plate lamp - 车顶灯: Roof lamp - 门灯: Door lamp - 尾箱灯: Trunk lamp - 侧转向灯: Side turn signal lamp
【Irradiation Angle】：360 degrees

【Product Size】：5头：Length 27mm, offset socket 9mm, maximum diameter 12mm

                       9头：Length 35mm, offset socket 9mm, maximum diameter 12mm

                       13 heads: length 43m9mm offset socket, maximum diameter 12mm
                  3-chip manufacturing, meticulously handcrafted - This product is currently hot in Japan!

【Sexual characteristics】:
1、The product uses SMD chips, and the ultra-thin board shape design enables better installation and adhesion, resulting in more uniform illumination and avoiding the disadvantages of poor illumination width caused by point-source lighting; the product is suitable for use with 10-13V voltage. This SMD product features diffuse light source, wide-angle illumination, and high lumen density;
2、Luminescence is instantaneous, with high purity of light, strong color rendering and penetrating power.
3、Adopting LED light-emitting diodes, it consumes less power and can better protect the car's electrical circuit.
4、LED does not have filaments, has good heat dissipation, low current, low heat generation, and the vehicle circuit is less prone to oxidation.
5、Highly resistant to seismic activity and with low temperature rise, it is a revolutionary new generation of solid-state light sources.
6、Suitable for DC 10-13V.
【Product Notice】:
No need to modify the circuit, simply replace the original traditional glass bulb, be aware that the original bulb is quite hot, prevent burns!
Refer to the product's dimensions when installing to ensure there is enough space for the installation location. Gently press the LED, do not squeeze the LED chip to avoid damage. LEDs have polarity, if they do not light up, reverse the direction and reinstall;
【LED Features】:
1.Can directly replace the original car traditional tungsten filament bulb.
2.LED emits high purity light, does not require a lampshade to filter the light, and the wavelength error is within 5 nanometers.
3.LED lights have no delay, whereas traditional incandescent bulbs have a 0.3-second delay.
4.LEDs consume less power, and when they achieve the same level of light as traditional bulbs, they use only 6% of the energy. They also help save electricity and fuel!
6.LED headlights can prevent the vehicle's control circuit from oxidation, with a maximum load current of 0.1A.

    Not suitable for 24V large trucks and buses. Please check carefully before installation!!