h11 high power ed lights 7.5w fog lamp

Product Parameters:

Working Voltage: 12VDC

 Output power: 7.5W

 Color temperature range: 6000K-7000K

 Luminescence color: white light, blue light, yellow light, red light

 Luminescence peak angle: 360°

Product Features:

 1. Sealed well: Waterproof, high-temperature resistant, corrosion-resistant.

 2. High brightness: 10,000-12,000 MCD;

 Energy saving: 5×1.5W is equivalent to the brightness of 80W tungsten lamp.

 4. Safety: 12V safe voltage, dual insulation;

 5. Long Service Life: The light source has a service life of 50,000 to 100,000 hours.

 6. Easy Installation: Simply replace the original car bulb.

 7.Can be used as front and rear fog lights / brake lights / reverse lights / turn signals, etc.

 8.The model is consistent with the original car, no need to change the wiring, just replace the original car bulb directly.

 9.Turn on without delay, with fast response time. No filament structure, vehicle control circuit is less prone to oxidation.

 10.Low energy consumption, high brightness, higher cost performance.

 11.Rich in color, pure in color, can be freely DIY, highlighting personalized lighting.

 12.Cold light source, good comfort, belongs to green and environmental protection light source.

 Fog light introduction:

   The lights that illuminate the road when driving in rain or fog can improve the visibility for drivers and surrounding traffic participants, allowing vehicles and pedestrians to be detected from a distance. These lights can be divided into gas fog lights and LED fog lights based on the material used. Gas fog lights, such as halogen lights (original car lights), are technically mature and cost-effective, but they produce radiation and contain mercury, with glass shells that are prone to breakage, leading to environmental pollution. LED fog lights have no radiation or pollution, and their theoretical service life can reach 60,000 hours.

 The following features and advantages of LED headlights

1. Installation is simple, plug-and-play, no need to change the wiring.

2. Energy-saving, low power consumption, high light efficiency, low load current, now the cost of oil is too high, 10% of fuel consumption is used on car headlights, replacing with LED lights can effectively save fuel consumption and protect the car's wiring.
3. Low heat dissipation, more conducive to road safety.
4. The response time is quick for LED lights, which do not require preheating and can start emitting light immediately. Even at a speed of 40 km/h, a 0.4-second delay is sufficient to cover a distance of 4.4 meters. This can effectively prevent rear-end collisions.
5. High resistance to earthquake, no glass, tungsten filament structure.
6. Ultra-long service life

 7. Pure color, bright colors, high brightness

 Installation Notes: The original vehicle's glass light is very hot, please be careful when replacing it. LEDs have positive and negative poles. If it doesn't light up, try it in the opposite direction.That's all (i.e., change the electrode).