Car Battery Fire Line Connecting Line 400a Car Vehicle Battery Cable

【Usage Instructions】：

1. The following is the connection procedure:

First, clamp the red wire of the starting line onto the positive red battery terminal of the 'rescue car.'

(2) Then clamp the other end of the red wire to the positive red battery terminal of the "rescue vehicle".

Clamp the black wire to the black negative battery of the 'rescue car'.

Then clamp the black wire to the black negative battery of the 'rescue vehicle'.

Start the engine of the 'rescue vehicle' first, then start the engine of the 'rescued vehicle'. If the rescued vehicle still cannot be started, please check whether the metal contact parts are poor contact.

Note: After starting the engine, it is still necessary to remove the starting jumper wire in order, or there may be a risk of a short circuit.

Steps for Disconnecting Wiring:

（1）Firstly, remove the black wire of the "rescue car".

Remove the black wires from the 'rescue vehicle'.

(3) Then remove the red wire of the "rescue car".

Finally, remove the red wire from the 'rescue car.'

 This model400ABattery cables are exported for packaging.

【注意事项】：

1. When the car battery is dead and the car won't start, you can use it to start another vehicle by connecting the batteries.

Perform the start-up. The bold battery starting wire can pass a maximum current of 200AMP,

Generally suitable for gasoline engines with a displacement of less than 2500cc or a displacement of

For diesel engines with a capacity of 2000cc or less.

2. Two vehicles must not have any contact, and the electronic systems of the two cars must be the same.

Voltage. If the battery is frozen, do not use this starter cable.

3. Before connecting, the engines, sound systems, and air conditioning of both cars need to be turned off.

The line length is 2.2 meters plus clamps, total length is 2.5 meters.

Weight: 0.72kg