Steel wire material trailer ropes are not only the right length but also capable of withstanding strong tension, making them suitable for various applications.4Meter long, the maximum can bear5The towing of a heavy vehicle is suitable for the majority of vehicles.(Large trucks and5A car over one ton cannot be used.")。。
2The reinforced casting with a lock hook is more secure and safe, and can prevent the iron hook from falling off when towing.SlashFracture (within the rated tonnage).
3It's convenient for you to tow the car away from the stranded location.
4Please do not exceed the designated tonnage.
【Product Features】:
1.The trailer rope has been specially processed by a special craft.Please provide the Chinese text you want to translate, and I will translate it into English for you.Capable of preventing and reducing vibration between two vehicles when towing..
2.The tow rope is made of steel wire.Please provide the Chinese text you want to translate, and I will translate it into English for you.Nighttime use is even safer..
3.Forged with a lock, the iron hook is more solid and safe.Please provide the Chinese text you want to translate, and I will translate it into English for you.Can prevent the trailer hitch from falling off when towing..
4.It would be convenient if you could tow your car away from the stranded location..
5.Please do not exceed the authorized tonnage..
【注意事项】：
1Can not exceed the prescribed load usage;
2Cannot drag on rough surfaces.
3Cannot be used for patching in damaged towing structures;
4When towing, the vehicle should be slowly pulled tight, and it cannot be dragged rapidly.
5Should be regularly checked to ensure the normal use of the towing.
【Towing Tips】：
  No matter what level of car, it is inevitable to encounter problems while driving on the road. If the car breaks down and cannot continue to move forward, as long as it is not a major problem with the steering or braking system, it can be towed back by oneself, and then repaired.
Tie one end of the tow rope to the front of the rear axle plate on the front car, and the other end to the front of the front suspension of the rear car as close to the center of the vehicle as possible. The distance between the two cars should be more than a few meters. It is best to tie a handkerchief in the middle of the tow rope as a identification marker.
When towing, an experienced driver should drive the vehicle at the back, as the vehicle at the back is difficult to control. If there is a slight carelessness or improper operation, it is possible to press on the tow rope or not to bend, leading to a following collision accident.
When starting a trailer, because of the additional weight of a car, the lead vehicle must add more fuel to increase the engine's rpm, and then slowly release the clutch pedal, allowing the rope to tighten before starting. While driving, it is necessary to control the vehicle speed, even if the road condition is good, do not drive at high speed.
When the vehicle in front shifts gears, the tow rope will loosen for a moment. At this time, the vehicle being towed must not apply the brakes. Otherwise, when the vehicle in front accelerates, the tow rope will suddenly tighten, causing a shock. Only when the rope is on the ground for a moment can you gently apply the brakes.
When descending a long slope, you can untie the rope and let the two cars slide down separately, which is very safe. If the slope is not long, you can descend with the rope attached. The leading car should not easily step on the brakes, and the following car can lightly step on the brakes to keep the rope always taut.
When stopping at an intersection, the vehicle in front should lightly press the brakes a few times to signal the following vehicle, and then the following vehicle should apply the brakes to bring both vehicles to a stop. When making a turn, one must be careful to take a wide turn, and try to tighten the rope as much as possible to avoid any danger!