[product model] electrostatic sticker m30-19 caoxi
[actual size] 28cm x 28cm (error about 1cm)
[product material] plastic, thick electrostatic sticker

[product packaging] 20 pieces/parcel, namely, 750 packages/carton.

Note: at least 100 pieces (5 packages) of each style should be taken at the multiple of 100, and no zero should be taken.

If you need other patterns, please contact the customer service.

Please contact customer service for other patterns

Frequently asked questions 

 What is an electrostatic sticker? 

It is the printing on the film on the pattern, with the electrostatic principle adsorption on the object

 (note that the electrostatic pattern is not hollow)

Where can the static be adsorbed? 

Glass wall stone, metal, wood, etc

Can static electricity stick the door? 

Can't, static electricity suits to stick to the metope of transparent or white bottom effect is best, the door is not apparent on go out

Will the static drop? 

Yes, over time, when the static electricity is lost, it will fall off, and the electricity will be rubbed by the hand, which can be absorbed again

What are the advantages of static electricity? 

Static no glue, avoid the trouble of removing adhesive, suitable for the buyer who do not wish to paste happy words for a long time

What are the disadvantages of static electricity? 

It's not hollow out, and it will fall out over time

Is static electricity good or does not dry adhesive good? 

They all have their drawbacks and advantages, and you have to choose what you want

If you do not want long-term paste, do not want to clear adhesive, you can choose electrostatic paste 

If you want to stick for a long time, choose adhesive

Why does someone say static electricity can't stick? 

We are also very strange, why the same thing, everyone reaction is not the same, some customers say very good, paste very strong, but also can not say that the buyer, although very few, but still some

So we've sorted out a few ways to get rid of them: 

First: choose a smooth and clean surface 

Second: before paste, can rub on the paper, more static electricity 

The 3rd: when stick, want to use the hand a little touch flat, the air between object and static electricity, as far as possible discharge, so a little stick of firm point 

Fourth: above three points, most of the buyers are able to stick, if you use the above three methods still can not stick, then use this fourth method

     See the front and back of the static electricity clearly, the smooth is the front, and the matte is the back. Apply some water on the smooth surface, and then you can stick it firmly (applicable to mirror glass, etc., the furniture is not recommended to stick it like this).

Fifth: 123 point you can not stick, do not want to besmear water, how to do? Finally, stick a little scotch tape (a small piece is enough) at the four corners of the static electricity so that it doesn't fall off. The tape at the four corners is very small (1cm*1.5cm is not much more than a dime). It must be much easier to clean the four dots than to clean a whole sheet of adhesive, right?

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

The origin of double happiness