plastic battery headlamp cob outdoor lighting fishing lightweight portable headlamp head-mounted working lighting lamp

Zhejiang Noda Technology Electronics Factory is a professional manufacturer and processor of various products, including high-intensity LED flashlights, high-intensity headlamps, solar LED flashlights, solar lawn lights, lawn lights, diving lights, and various gift LED lights. The company has a complete and scientific quality management system. The integrity, strength, and quality of Zhejiang Noda Technology Electronics Factory have been recognized by the industry. We welcome friends from all fields to visit, guide, and conduct business negotiations. Contact phone: 15967981235, Mr. Wu.


Instructions for Using a High-Intensity Torch: Switch Usage: 1. The battery is inserted with the positive terminal facing in (towards the head of the torch), and the negative terminal facing out (towards the tail). 2. The switch is located at the tail of the torch. Pressing the switch lightly is for the dimming function, while pressing firmly is for the on/off function. Circuit Board Usage: 1. Our torches use advanced voltage stabilization and constant-current technology to effectively meet the requirements of LED torches for voltage stabilization and constant current. 2. Special Notice: a. Do not exceed the recommended voltage, which should not exceed 42V. b. Insert the battery with the positive terminal facing forward; do not reverse it, as this may damage the board. c. Monitor the temperature of the torch to ensure proper cooling. d. Only professionals should open the circuit board; do not open it if you are not familiar with electronics. 3. Warranty: Torches with the circuit board opened or modified are no longer covered by the warranty. Lithium Battery Usage: 1. The torch uses 18650 lithium batteries as its main power source. 2. Features of Lithium Batteries: - Lithium batteries charge differently from mobile phone batteries. - Lithium batteries have no memory effect, so they can be charged at any time without the need for full charging or discharging. 3. First charge for at least 6 hours, and thereafter, charge until the charger's green light turns on. There is no need to overcharge. 4. The natural discharge rate of lithium batteries is approximately 1% per day when not in use."Or less, although slowly, but to prevent the placement time too long. 5. Note the battery waterproof, anti-ageing, anti-falling, and so on. 6. Special notice to use the "three defenses" charger with anti-overcharge, anti-reverse connection, and anti-short circuit; 7. If the battery is not used for a long time, it should be fully charged and saved, and it should be charged and discharged once every three months or so; 8. Warranty statement: The battery is no longer within the warranty scope after it is shipped. IV. The use of the flashlight 1. When using the flashlight, choose according to the requirements of the flashlight voltage and battery, do not use randomly, to prevent burning out the circuit board. Do not use different models and voltages of batteries at the same time. 2. During use, when the brightness of the flashlight significantly changes, turn off the flashlight to prevent the battery from being over discharged. 3. Heat dissipation technique: During the use of the flashlight, ensure heat dissipation. Strongly recommend that when the battery is fully charged, it is best to use the second level, which can extend the life of the flashlight's head and battery! Holding the flashlight tightly with your hand is the best way to dissipate heat; it is recommended to light it up according to the heat of the flashlight and dissipate heat or turn it off in time, wait until the temperature drops, and then light it up to facilitate heat dissipation. 4. For the explanation of the flashlight's waterproof, anti-shock, and so on, strengthen prevention. 5. Keep the inner wall of the lamp cup clean, and do not use your hands or hard objects to wipe; clean the fingerprints on the lens with a cotton swab dipped in lens cleaner. 6. Do not direct the flashlight beam into the eyes, which is too bright and blinding, which may affect vision, especially for children. 7. If the flashlight is not used for a long time, please remove the battery (one month or longer), to avoid chemical corrosion. V. Protection instructions 1. Do not leave the flashlight for a long time in contact with the sun, water, chemicals, and corrosive gases, to avoid damage to the flashlight protection layer. 2. To maintain the "0" ring and the thread rotation, according to every 2 years.1. Apply Vaseline oil to the surface three times. 6. Troubleshooting: 1. Check the battery: Ensure that the battery is charged and installed in the correct direction. Do not use batteries from different brands, and do not mix new and old batteries. 2. Check the tail cap: Ensure that the switch is tightened and in good contact, and that the metal contact between the tail cap's copper columns and the pressure ring is good. 3. Check if the bulb head is loose. Common Misconceptions About Flashlight Purchases: Misconception 1: Brightness is not always better.手电要提升亮度方法一是从灯头到反光碗，电池，主扳设计等综台提升．国际大牌和国内名牌产品，都经过了严密的设计和测试，保证使用寿命和安全。 方法二是采用加大电压和电流来实现：超频带来的后里足发热目巨大，因为两者不匹配，导致频繁烧灯头和锂电池经常过放电，只能点亮几分钟并且经常需要维修。 误区二：被虚假参数所误导 不少卖家有意无意的虚标流明数值 误区三：橘皮反光碗未必就比光面的好 橘皮反光碗的反光效率要比光面的低些，大家可以发现市场上大功率搜索灯用的基本上都是光面碗，因为反光效率高，射程远。那么为什么多数战术手电要用橘皮反光碗呢？原因很简单，为了得到个完美的光斑。因为我们一般用的灯泡都是有灯丝的，而反光碗反射出来的光斑恰巧是个灯丝的投影，其原理类似于凸透镜的成相原理。这样光斑就是个清晰的灯丝了，很难看。我们看参数更要看实际效果！ 本店所卖手电真实标注亮度，电池续航时间长，光色纯净透白，聚光效果完美！是工程作，野外运动等极佳的辅助工具！ 本手电的优点：体积小巧，重量轻，便于携带，坚固耐用，具备全天候使用功能，光照强烈，直射距离远，强弱光线可选择，强光—远时，弱光——近照，紧急时——爆闪光。顶部氧化钛合金加强攻一击一头设计，可在紧急情况下替代安全锤用来砸碎车窗逃生。 【常见问题】 问：需要先充电再使用吗？ 答：请先使用，等手电的光暗点的时候，再充电4小时再使用，锂电池最怕过放电，请养成平时充电的习惯。 问：灯泡坏了怎么办？ 答：灯寿命10W小时万一不幸真坏了，可以联系我们，折价调换。 问：什么是锂电池过放电？ 答：亮度明显减弱还继续使用，造成的电池损伤，即便经过专业的激活按作，电量也会明显减少，所以平时请注意电池的保养，多多充电。 强光手电使用注意事项 灯头不要经常拆解，以免造成反光杯或灯泡损伤。 强光手电保养注意事项 使用时请对电筒进行日常的常规保养使其能持续为您提供高质量的服务 1After each use, please wipe the flashlight with a clean soft cloth. 2 When the flashlight is contaminated with seawater or corrosive liquid, please clean it immediately with clean water and blow it dry with a hair dryer. 3 If the head and tail cap are not tightened smoothly, please apply a small amount of silicon grease at the interface. 4 When the flashlight is not in use, please remove the batteries and store them in a cool place.