Product Name: S-2131W-C [] (XM-007A upgrade ) mobile phone navigation frame frame

[material]: high quality hardware +ABS+ universal bracket

[Specification]: adjusting the width of 5CM--10CM

[color]: Black

[weight]: 0.10 KG

1 360 degree turntable can rotate freely, using a lock head side of the turntable. According to the edge of the lock icon instructions.

2. slider track with free sliding plate, 360 degrees rotation and sliding. To avoid the mobile phone side

keys and other data interface.

3 . Increase the design of two air conditioning irons, and air conditioning fittings can be used to the window on the car to do collocation.

Product performance:

1. double arm hydraulic resistance, two-way bounce with a smooth, low noise characteristics, uniform speed etc.. Retractable arm (42-116mm) suitable for loading of all kinds of GPS, intelligent mobile phone and other products.
2. independent and independent supporting slide design, can avoid the side keys and other mobile phone data line interface.
3. support adsorption force is good, adjust the different angle through the rotary bearing and the bracket, easy to use.

installation instructions:

1. will sucker bracket at the top of the connecting head four clamping and the main disk hole phase combined into the buckle and confirmation has been firmly. By rotating

bearing bracket and turn the turntable to adjust the required angle;

2. tear the protective film on the bottom of the sucker and the sucker toward has clean the windshield of the car and press and pull pressure valve,

recognize support bracket of the sucker adsorption has been firmly ;

3 . Pressed by hand the main button, bracket arm bidirectional natural smooth bounce, GPS, PDA or other products into clip arm between

position, adjust the height and width of the clip arm push in stuck products.

accessories 4. disc: torn red protective layer alignment (at least ouside 58mm is pressed against the surface is clean, the tear

protective film sucker alignment has clean central disk compression, rotation vacuum valve, confirmed to reach the locking state;

paste accessories 5. sponge: without the use of photo paper, use it to replace the position of the central body photo paper.

Buckle 6. air: air conditioning button clamping head along the back part of a main body of the air conditioner feet jack slot into position and anti torsion, confirm of

to locate the state. At this time, the body can be the use of air conditioning button foot and vehicle air conditioning window a mix of.

disassembly instructions:

1 . To use a hand to stabilize the PDA or GPS products, another hand to press the subject of button, after the clip arm automatic pop-up take products;

2 . Remove the support, will open the valve, easy to get under the bracket and then pick up the bottom edge of the suction suction cup bracket PVC.