factory direct sales 58d (standard type) reinforced wrench car tools auto protection tools

Usage Method

1. Insert the air gun cylinder into the handle end output square head, and fit the rocker arm onto the other end.

2. Insert the air wrench sleeve onto the nut that needs to be removed (tightened), pay attention to the direction of tightness, and shake the handle to make the handle tightly against the side of the other bolt.

3. When the nut is loosened, replace the extension bar for quick disassembly. When tightening, first quickly tighten the extension bar, and then use a power wrench to lock it securely.

4. Do not apply more than 20 kilograms of force, or it may damage the nuts or the components of this product.

5. Do not use the cylinder as a hammering tool.

6. Do not apply force after adding a shackle or a pry bar to the joystick.

7. When disassembling, pay attention to the direction of the tightness of the nuts. If you use a lot of force but cannot loosen the nuts, check to see if you have turned the shaking direction the wrong way.