This section is divided into flat head and attack if necessary please note or random delivery

[CREEQ5]: XPE lighting

[material]: aluminum alloy

[]: press switch tail switch

[battery:1*18650 or 3 batteries of 7

[] continuous light time: 3-4 hours (depending on the battery, stalls and )

[packing]: single white box or gift set

[size]: 13.4 (long) *3.1 (head diameter) *2.5 (pipe diameter)

[net]: 124G

[]: 200 lumens brightness, light effective range of 200-300 meters

[circuit]: constant current drive circuit, DC-DC.
[]: 3 stalls stalls light - low light - flash explosion

features
. lightweight, compact, practical, highlighted in a body! The head rotates the light function, at any time to lock the target, and can be free to control; the use of convenience, is a good helper for outdoor travel.

using advanced rotary dimming technology, not to jump file, practical and reliable, suitable for use in different situations.

Design, . Advanced optical system of long range, center the perfect spot, floodlight is wide and uniform.

] the United States imported Cree bulb, high quality, stable, durable, life is more than 10 million hours, eliminating the need for replacement bulbs troubles.

using intelligent IC chip three dimming circuit design, light - low light - flash explosion, can meet the needs of different scenarios.

using high quality PMMA high strength acrylic lens, both condenser and floodlight, the perfect spot.

. Life is waterproof and rainproof, anti corrosion! Easy to cope with the wild environment!

flashlight instructions for use
note:
1 and a flashlight switch in the tail, press the button energized, again according to a power, order cycle;
2, how to shift: this function is only suitable for modulating light flashlight, single file flashlight without this feature. 如果想调换档位，通电进入任意档，持续通电时间低于2秒就断电，则下次通电后换档，依次循环，通电3秒以上具有记忆功能，下次通电还是默认这个档位，建议轻触开关进行断电换挡更方便；
3、请按电筒要求使用合适的电池，请勿使用型号不对的电池，不然有烧坏电路的危险；
4、安装电池的时候正极先进入电筒，除了无极性手电筒装电池不分正负极外,其它手电筒反接不亮；
5、非专业人员请勿打开线路板，打开或处理过线路板不在保修范围；
6、本公司手电具有生活防水能力，一般雨淋不会出现问题，但不具备潜水功能，请勿携带此手电潜水或长时间放在水盆、浴缸；
7、为保持“O”型圈（密封胶圈）及螺纹旋动顺畅，请每年2-3次在其表面擦抹硅脂等。 ;
and 2 and 1:
is with you if
illustrate the use of
lithium battery protection circuit batteries do not have to look at the following instructions, the following matters needing attention without protection circuit batteries need to pay attention and not to overcharge and over discharge, or prone to leakage scrap;
, cannot battery power is exhausted from the torch inside take out the battery, the battery remaining power will be timely charging, charging time in 3-5 hours, the charger indicator changes promptly removed, can not long time more than sufficient, for a long time does not use the battery should be charged with preservation of normal in three months or so to charge and discharge times. Three,
warranty: 1,
flashlight warranty: three months warranty by the company sold flashlight, lifetime warranty. Three months of quality problems, free maintenance, free replacement parts (only with electronic components), man-made damage is not in the scope of the problem, three months later, free maintenance costs, charge replacement parts cost.
2, battery warranty Description: battery is not refundable replacement, because of the particularity of the battery, electronic products, and due to the torch voltage, use method and buyers of proficiency and bring some problems, please pay attention to, please understanding! Three,
troubleshooting
our products before delivery to check, ensure shipment will have no problem, no problem, but in transit due to turbulence, such as damp, inevitably there are some problems, if there are light does not shine, or only light, please repair in accordance with the the following methods: please ensure that each thread tightening loose flashlight
maintenance before, if the thread is not tightened may be the cause of
1, check the battery is not bright or dim light: ensure that the battery has power and load in the correct direction of the battery, do not use different brands of batteries, the battery can not be used together
; 2, determine the fault: unscrew the tail, exposing the battery cathode, with a metal key or tweezers like connecting the battery negative electrode and battery by the flashlight body exposed without oxidation part, see if lit. If you can, is flashlight switch, please in step 3 are examined; if not light please check circuit warehouse and the circuit board is connected at the soldering whether open welding and weld if there is please re welding can solve the problem.
3, checking the tail cap switch: unscrew flashlight tail, you can see the switch copper cap of the outer ring with two concave point switch pressure ring, with a pair of scissors or rigid tweezers in in the two concave points along the clockwise rotation, check switch pressure ring is loose, to ensure that the switch pressure ring pressed the switch, not loose.
as 4, in accordance with the above method still can not solve the problem, please send back the flashlight, we solve your problem, please contact us to ask for address sent back and sent back please write a note in the parcel indicate whether it is because of what the causes of rework, but also to write clear your return address, to avoid misunderstanding. Friendship
that we attach great importance to the buyer for every one of our evaluation, we will make every effort to do a good job in after-sales service, please do not arbitrarily for us to do the evaluation, which will allow us to very sad, look forward to your cooperation again!