Welcome to come to order their own brand

Applicable scope:

Metal, rubber, plastics, electronics, jewelry, electrical components, etc..

Using method:

1, first clean the surface, remove the surface of the dust, oil, rust, etc., to the metal, the best first grinding rough, PE, PP or PTEE and other plastic, should first make surface activation.

2, open the front cover, and the finger tip to buckle, leaving the residual liquid, and then cut out the hole with scissors.

3, in was then drops of a droplet and then, immediately then and remain until the hardening, then area should not be too much, then layer thickness should be not more than 0.2mm.

4, after the use of clean containers, and cover the lid, stored in a cool dry place or cold storage.

Note:

1, the steam of the present agent will stimulate the mucous membrane and eyes.

2, to avoid contact with the skin and into the eyes, if accidentally immediately with plenty of water for washing and send to hospital, wash eyes when using dilute sodium bicarbonate solution.

3, hand can touch, soap and water, washing liquid and wash the pumice.

Shelf life: 12 months (20 C)

Part of our products have been displayed on the website, please contact us if you want to know more about the products.