1000A anti freezing car emergency battery cable ignition cable ignition

SAILHOPE HARDWARE TOOLS 15yr.

Contacts:Lu Minghui Chat

Mobile:86-13819957205

E-mail:waycsu880603@163.com

Click to Contact Yiwugo official customer service for International sourcing.

Yiwugo official customer service X

Whatsapp:

Email： yiwubuy@yiwugo.com

Description
Reviews(/5)

play FireWire little knowledge:
normal displacement of 1.6 car and hit the line of fire must meet the eight square above products can be normal train is successful, if the 2.0 displacement of the car, we must to spark line more than 10 square to a successful ignition and 3.0 above will need 12 square line! This product is 35 square meters (BOLD thickening battery line of high-end battery line, and practically applicable in the market for all types of automobile. To ensure that current usually, increase product use period .

Oxford cloth bag packaging transparent

according to daily life actual needs, different size, price also has the corresponding difference

is generally divided into two kinds of GB and non-standard specifications GB, non-standard length 2.4 meters 2.2 meters in length.

SIZE (2.4M) (2.2M) QTY/CTN
200A 11 元 8.5元 30
300A 13 元 10 元 30
400A 14.5 元 10.5 元 30
500A 16.5 元 11.5 元 30
600A 17.5 元 12.5 元 30
800A 19 元 15 元 20
1000A 19.5 元 16 元 20
1200A 20.5 元 17 元 20
2000A 35 元

export packing bag, beautiful appearance, convenient use

antifreeze resistance, insulation high-grade battery line, prolong the service life of products

more bold, ultra thick copper elastic clip, ensure that there is sufficient clamping force , will not fall off.

when your car don't worry because no electricity can not hit the car from the side of the road, hit a taxi over two one clip easily.

Connection

program follows:
(1) the first will start line of the red wire clamp in the rescued car red battery cathode.
(2) and the red wire clamp at the other end of the red battery in the "rescue vehicle".
(3) the black wire clamp on the "black battery is saved on the car".
(4) and then the black wire clamp in the "rescue vehicle" black negative battery.
(5) to start the engine of the "rescue vehicle", and then start the engine of the "rescued car". If found to be saved is still unable to start, please check the contact part of the metal contact is not bad. When the engine is completed, it is still necessary to take the lead in sequence, otherwise it may cause a short circuit.

line removal procedures are as follows: (1)
first "rescued car" in black wire.
(2) and the "black wire rescue vehicle" in.
(3) and "red wire rescue vehicles" in.
(4) "the red wire is saved in car".

[note]
1, in strict accordance with the operating procedures.
2, check the two battery voltage indication, ensure voltage two battery of the same.
3, shut down all the car load, neutral position, pull the handbrake, start the engine. Smoking is prohibited near the vehicle.
4, if the car battery has been frozen, prohibit, otherwise it may cause explosion.
5, please make sure the battery terminal correct polarity.
6, operation, automobile and other vehicles can not contact.
7, the battery will produce explosive gas! Please install the cable when wearing protective goggles.
8, if the acid storage battery inadvertent spills and splashed on the skin or eyes, please rinse immediately with plenty of water, and then to the doctor for help.

environmental conditions of the]:
battery line under the following circumstances can continuously and reliably work: should be less than 85% in the relative humidity of
1, air.
2, place of use wire free, dust explosion, gas corrosion and damage to the insulation.

3, use place without vibration and impact.

Update time：20210309162726