Super glue, 502 instant glue

Scope of application:
Metal, rubber, plastic, electronic components, jewelry, electrical components and so on.
Usage:
1, first clean the next surface, remove the dust, oil, rust, etc., then on the metal, it is best to first rough, PE, PP or PTEE and other plastic, should first make the surface activated.
2. Open the front cover and gently buckle the tip with fingers to leave no residual liquid, and then cut out the holes with scissors.
3. Drop a small drop of the adhesive on the surface to be followed, immediately follow up, and maintain until the hardening, then the area should not be too large, then the layer thickness should not be more than 0.2mm.
4. Wipe the container after use and put the lid on. Store in a cool and dry place or refrigerate.
Notes:
1. The vapor of the adhesive may irritate the mucous membrane and eyes.
2. Avoid contact with skin and eyes. In case of accident, wash with plenty of water immediately and send to the doctor.
3, touch the hand, can be soap, water, detergent and pumice