W-77 pneumatic spray gun spray gun spray paint furniture high steam sprayer

IMG; "src=" alt= "http://img1.yiwugou.com/i004/2015/12/08/70/33e33a3b7b3af143a25da9d594bef599.jpg" &lt "" air flow size), two to see (see the spray paint liquid atomization degree and the size of the sector size). Several important parameters of the spray gun are as follows: the air pressure: the air pressure is (0.4--0.6Mpa); the spray width is about 10cm; the distance between the nozzle and the spray gun is 15--20cm; the speed of the spray gun is 30--60cm/. Using the method of




:

1, the use of before paint cans and trachea and the gun body is connected closely.

2, trachea on the gun body is connected to a 2.5-4.5kgf/cm2 pressure of compressed air source, the liquid into the spray gun, must through the oil-water separator, and filtering.

3, charging: using cup 4# will coating with appropriate solvent dilution and mix thoroughly, the filtering net filtering in paint into the tank.

4, use and slightly pulling the trigger, the valve open, compressed air from the air nozzle, then you can blow away the dust on the surface coating, and then continue to back pulling the trigger spray nozzles that spray paint mist.

5, spray to 180-220mm for the best distance.


note:


1, not available sharp metal wire is electrified, the nozzle and the nozzle of the hole, or any damage will cause spray is not normal. Not long time soaking in dilute solvent


2, spray gun cleaning.


3, using diluted solvent to remove the gun in the pipeline.


4, do not use in coating dry after overhaul.


5, the spray gun main parts made of aluminum alloy and brass material, should not contact the acid, strong alkaline medium, in order to prevent corrosion damage.