this gun is suitable for all kinds of middle and bottom, the viscosity of coating. Vehicles, furniture, instrument, machinery and equipment, furniture and spraying Hotel, residential, commercial and other decoration painting. Main features: nozzle and ejector using heat treatment material, high hardness, abrasion resistance, can prolong the service life
range: mainly used in high viscosity coating, used in the treatment of advanced goods bottom, also applies to glue, varnish paint
package: single color box packaging
features :
1. uses a high precision structure manufacturing, durable.
2. spray evenly, easy to use.
3. mirror surface polishing treatment, anti rust and beautiful.
4. has wide application range, convenient use
Paint adhesion
5. gun cap to reduce , spraying more uniform spray shape, stable
two type trigger, first blowing dust, second paint
- adjustable spraying range, adjustable vertical, horizontal or other angle
- volume control knob can adjust the volume size, the spray range adjusting screw can make the spray range into a circular or elongated
can be suitable for water-based, oil-based paint and other high-grade paint spraying
S-770S (under pot pot) price of 40.5 yuan a single color box 20
S-770G (a large pot of ) price of 37 yuan a single color box 20
S-770S (under small pot pot ) price of 33 yuan a single color box 20
S-770G (a small pot) price of 31 yuan a single color box 20
The gun
spray gun of the selected, primer in the coating is to fill in, increase the thickness of the coating, so the primer larger particle size, viscosity larger and larger proportion, emphasizing paint quantity to be big, so spraying primer spray gun should be nozzle to large diameter and under storage jar of paint to some big. And spray paint, high requirements in the degree of atomization, often used in small caliber and good atomization spray gun. , 0.8mm, 1.2mm, 1.0mm, 1.3mm, 1.5mm, 1.6mm, 1.8mm, 2.2mm, 2.5mm,, 0.6mm,,,,, 2.0mm,, etc., can be selected according to the size of the spray coating and spraying. For example: 2 caliber? 0 - 2? Mm, commonly used to spray particle size is coarse, viscosity of the primer or large area spraying; aperture 1.5 - 1.8 mm, mainly used to spray paint; diameter 0.6 - 1.3mm, mainly for small parts or crafts spraying.
automatic spray gun spray gun
adjustment adjustment is mainly pointed out that the gas and paint quantity adjustment. This is the main factor of two interrelated. Air volume is too small, not easy to paint liquid atomization, the liquid paint drops down will make the film not smooth. And the amount of the paint is corresponding to the size of the air outlet quantity, prior to paint application to adjust the proper air quantity and corresponding to the amount of paint, paint liquid atomization, evenly sprayed on the surface. Adjust the spray gun to listen (listen to the voice of the air, know the size of the air flow), the two to see (see the spray paint liquid level and the size of the fan area). Several important parameters of the spray gun are as follows: the air pressure: the air pressure is (0.4--0.6Mpa); the spray width is about 10cm; the distance between the nozzle and the spray gun is 15--20cm; the speed of the spray gun is 30--60cm/. Using the method of
:
1, the use of before paint cans and trachea and the gun body is connected closely.
2, trachea on the gun body is connected to a 2.5-4.5kgf/cm2 pressure of compressed air source, the liquid into the spray gun, must through the oil-water separator, and filtering.
3, charging: using cup 4# will coating with appropriate solvent dilution and mix thoroughly, the filtering net filtering in paint into the tank.
4, use and slightly pulling the trigger, the valve open, compressed air from the air nozzle, then you can blow away the dust on the surface coating, and then continue to back pulling the trigger spray nozzles that spray paint mist.
5, spray to 180-220mm for the best distance.
note:
1, not available sharp metal wire is electrified, the nozzle and the nozzle of the hole, or any damage will cause spray is not normal. Not long time soaking in dilute solvent
2, spray gun cleaning.
3, using diluted solvent to remove the gun in the pipeline.
4, do not use in coating dry after overhaul.
5, the spray gun main parts made of aluminum alloy and brass material, should not contact the acid, strong alkaline medium, in order to prevent corrosion damage.
