car battery fire line 500a bold emergency battery cable 2500 a5 m battery clip car emergency 汽车电瓶搭火线 500A加粗应急电瓶线 2500A5米电瓶夹 车载应急

Don’t panic if your car can’t start due to no battery power. Just hail a taxi from the roadside and use a battery clamp and tow rope to get it fixed easily. It’s rare for cars to run out of battery, but once it happens, it can really be annoying. Having a battery clamp and a tow rope on hand would be better—no worries at all. 【Operation Steps】 1. Connect the red clip terminal (+) of the cable to the positive terminal of the dead battery. 2. The other red clip terminal (+) of the connection cable should be connected to the positive terminal of the good battery. 3. Connect a black clip terminal (-) of the cable to the negative terminal of the good battery. 4. Connect the other black clip end of the cable to the engine casing or vehicle body. 5. When starting up, please complete the operation instantly, with a 10-second cooldown period between consecutive starts. 6. The steps for uninstalling the cable wire should be carried out in the reverse order of installation. 【Precautions】 1. Follow the operation steps strictly. 2. Check the marked voltages of both batteries to ensure they are identical. 3. Turn off all loads in the vehicle, shift to empty gear, pull the handbrake, and start the engine. Smoking is prohibited near the vehicle. 4. If the car battery has frozen, do not start it, otherwise it may cause an explosion. 5. Make sure the battery terminals have the correct polarity. 6. During operation, the vehicle must not come into contact with other vehicles. 7. The battery may produce explosive gases! Wear protective goggles when installing the cable. 8. If acidic substances in the battery accidentally leak and splash onto the skin or eyes, immediately rinse with plenty of clean water, and then seek medical help. Product Information