10 M Roll Rhino Leather car Protective Film Anti-Dirty Film Width 10cm

Width 10cm=9 15cm=12 20cm=15

【Origin】: China

【Color】: Transparent

【Size】: 30m

【Material】: Polyurethane film

【Packing】: None

【Instructions】: This item is not a full 21~22 meters.   

Currently, many car door interior designs are light colors, which can easily lead to shoes scraping or hitting other hard objects when entering or exiting the car. This can easily result in dirty marks or scratches that are unsightly. In the past, many car owners have struggled with the difficulty of cleaning these plastic areas, as they accumulate over time, no matter how much they clean, they still look dark and unsightly, which is very inconsistent with the rest of the car interior.

 
This product is made of high-tech quality polyurethane film (commonly known as rhino leather), which has the same super toughness as rhino leather. It can protect the plastic panels of various parts of the car, with excellent material flexibility, transparency, and adaptability to curved surfaces. There is a sticky back that can be attached to the door panel interior. After installation, if it gets dirty, it can be cleaned as new with a simple wipe. Installation of the product:
First, clean all the areas to be pasted with alcohol or foam cleaner to remove dirt. If there is wax on the surface, it must be washed with stripper and hot water over 60 degrees Celsius (important).
Compare the shape of the film with the interior of the car door, and cut off the excess parts,
Tear the mucous membrane and adhere it to the surface. If there are uneven places, hold one side with your hand and use a hot air gun (or a hair dryer) to heat it up. Then, press lightly to attach it.
Please go to a professional car decoration place for construction.

Notes:
First, measure the length of the area to be pasted (e.g., 90 cm). Cut the product to the required length of 92 cm (preferably 1-2 cm more than needed). Remove the backing paper from the cut product, align the upper side of the area to be pasted, and smooth it out. If the alignment is not correct, you can re-peel and re-paste. Finally, cut off the excess product from the left, right, and lower sides of the pasting area, smooth it out, and press down on areas with curves. If necessary, cut the product in the middle to fit the curve, and press it down firmly. It's best to ensure that the product is pasted inside the area to be pasted, it's very simple! (It's best to use a hot air dryer in winter to heat up the adhesive to make it more secure.)