A jack is a common lifting tool in car life. Specifications range from 2 tons to 200 tons. It is packaged in a single neutral English color box.A vertical jack is simple in structure, easy to operate, compact in size, and light in weight, making it convenient to carry and repair. It is widely used in factories, warehouses, bridges, piers, transportation and construction engineering, and automotive lifting tools. This product can only be used to vertically lift and support.。How to use:
1. Lifting
1. Turn the jack handle clockwise and close the return oil valve;
2. Place the jack under the correct lifting position of the vehicle. If necessary, rotate the adjustment screw of the jack counterclockwise until it makes contact with the vehicle; place it in the correct position.
3. Insert the jack handle into the handle sleeve, and operate the handle up and down until the vehicle is raised to the desired height.
Two, Decline
1. Unhook the handle, and loosen the return oil valve with the handle. Please slowly turn the handle counterclockwise to loosen the return oil valve, but do not loosen it more than two turns;
2. After the vehicle is completely lowered, move the jack. If the adjustment screw is in the extension position, turn it clockwise until it is completely detached from the vehicle.
Notes:
1. Before use, please read all instructions carefully.
2. Do not exceed the load capacity of the jack;
3. A jack can only be used on a hard, level surface.
4. Before working under a vehicle, ensure to use additional safety supports (e.g., a jack safety stand with sufficient load-bearing capacity);
5. Users must not disassemble the jack without authorization to avoid failure or danger;
6. The lifting height of the jack shall not exceed the limit position hole.
7. Jacks must not bear loads for a long time without supervision; 8. The descent speed of the jack must be slow, and it is strictly prohibited to suddenly lower it while it is under load.
9. Jacks should be stored in a dry and dust-free place, and should not be exposed to direct sunlight or rain. They are not suitable for use in workplaces with acidic, alkaline, or corrosive gas.
10. Users should regularly inspect and maintain the equipment according to their usage.
Maintenance Method:
Lubricate/Lubrication
1. Place the jack in a vertical position.
2. Lower the pump level and the piston until it is in a completely relaxed state;
3. Remove the rubber oil plug from the jack.
4. Pay attention to injecting high-quality hydraulic oil and eliminating air.
5. Install the rubber oil plug.
Self-produced and sold. Kit tools. Household tools. Contact person: Ms. Hu
Contact phone: 13486997810
WeChat: HHH552066155
Shop: International Commerce City, Yiwu, Zhejiang Province
QQ：729387828和1960836735
6. Regularly lubricate the transmission connection and adjust the screw.
