factory direct solar lantern camping lamp camping lamp outdoor tent lamp stretching lamp

Solar-powered stretch camping lamp
Product weight: Net weight 300g, with packaging box 349g
Packing Size: 60X40X43, Weight: About 26.8KG
Material: Plastic
Packing: Color Box
Packing Quantity: 72pcs
Product Size: Unstretched (8.6X13cm) Stretched (8.6X18.6cm) Handles raised by 6cm
LED light bulbs: 6 pieces
Small iron handle
Stretch to turn on the light, retract to turn it off (ensure to check if the light is off when retracting to avoid it remaining on, which could lead to power consumption).
Use solar charging directly, also can use 3 AA batteries.

The product's exterior paint looks very high-end. It is illuminated by 6 high-brightness LED lights, which are bright and soft. It only takes a pull to turn on the light and a pull to turn it off, which saves space and is easy to take with you when traveling. There are three power options: solar charging in the sun, lighting with ordinary AAA batteries, and charging with 220V power. The light can last about 8 hours after being charged once. If there is no power source to charge in the wild, you can place it in the sun to charge, and if there is no sunlight, you can use three AAA batteries to light it. It also has a USB port, which can charge mobile phones and other devices.

Manufacturer wholesale Boruo lighting extendable switch solar camping lamp horse lamp outdoor hand-held camping lamp horse lamp

1. Switch Usage Instructions
1. The battery is positioned with the positive terminal facing in (towards the bulb end) and the negative terminal facing out (towards the tail end).
2. The switch is located at the tail, and the switch function is the same as the safety switch. Pressing lightly on the switch is the dimming function.
Section 2: Circuit Board Usage Instructions
1. The flashlights in our store adopt advanced voltage stabilization and constant-current technology, which can effectively meet the requirements of LED flashlights for voltage stabilization and constant-current.
2. Special Notes: a. Please do not use the product under excessive pressure; the voltage should not exceed 4.2V. b. Ensure that the positive terminal of the battery is facing forward; do not reverse it, or the board may be damaged. c. Pay attention to the changes in the temperature of the flashlight to ensure proper heat dissipation. d. Please do not open the circuit board unless you are a professional.
3. Warranty Statement: The warranty does not cover opened or handled circuit boards.
Section 3: Lithium Battery Usage Instructions
1. Features of Lithium Batteries: Lithium batteries have a completely different charging method from mobile phone batteries; Lithium batteries have no memory effect, and they can be charged at any time, but they should not be overcharged or overdischarged.
2. The first charge should last at least 6 hours, and after that, it's enough as long as the charger's green light turns on. There's no need to overcharge.
3. Special Note: Use a "Three Defense" charger with overcharge protection, reverse connection protection, and short circuit protection.
4. If the battery is not used for a long time, it should be fully charged and stored. It is recommended to charge and discharge it again every three months or so.
Section 4: Instructions for Using Torches
1. When using the flashlight, choose it based on the requirements of the flashlight for voltage and batteries. Do not use it randomly to prevent burning out the circuit board. Do not use batteries of different models and voltages at the same time.
2. When using the flashlight, turn it off if the brightness significantly changes to prevent the battery from being over-discharged.
3. Heat dissipation tips: Ensure that the flashlight dissipates heat during use. It is strongly recommended to start with the second level when the battery is fully charged to extend the life of the flashlight head and the battery! Do not direct the flashlight beam into someone's eyes, as the bright light can be blinding and may affect vision, especially for children.
Fault Inspection and Maintenance
1. Check the battery: Ensure that the battery is charged and installed in the correct direction. Do not use batteries from different brands, and do not mix new and old batteries.
2. Check the tail cover: Ensure that the switch is tightened and in good contact, and that the metal contact between the tail cover's copper column and the press ring is good. Also, ensure that the lamp head is not loose.