[instructions]:

A and connection procedures are as follows:
1 first start line of red wire clamp in the " rescued car " on the the red battery cathode.

(2) and the red wire clamp at the other end of the red battery in " rescue vehicle " .

(3) the black wire clamp in " rescued car ' black negative battery.

(4) and then the black wire clamp on " rescue vehicle " black negative battery.

(5) to start the engine " rescue vehicle ", and then start the " rescued car " engine. If it is found to save the car still can not start,

check the metal contact parts is bad.

note: after starting the engine, still need to be removed in order to start a fire, or may cause a short circuit.

Two, demolition procedures are as follows: wire

(1) first " rescued car " black wire removed.

(2) and the black wire " rescue vehicle " except under.

(3) and the red wire " rescue vehicle " except under.

(4) the red wire " rescued car " except under.

This 500A battery line for export packaging.

[note]:

1, the car can not start without electricity, the use of it can be started by another vehicle battery. The bold line accumulator,

maximum by current of 500AMP, generally suitable for displacement in the 2500cc within the of gasoline engine or displacement within 2000cc

Use the battery between diesel engine.

2, two vehicles can not have any contact, the two car of the electronic system to have the same voltage. If the battery is frozen, please don't

use the start line.

3 , before connecting, two car engine, acoustics, air conditioning all need to turn off