2 ton electric scissor jack electric jack 2t vehicle electric jack

Product description:

     Electric jack is another innovative revolution of the hand remote jack. This product utilizes the motor, relies on the automobile battery power source as the power source, through the control switch, freely and evenly lifts the mechanical part of the jack, saves time and effort when the automobile changes the tire, avoids the traditional jack operation danger, is convenient and safe. Easy change of tire is no longer a dream, is a modern car family's good helper!

Operational guidelines:

 stepA sudden1: park the car near the level and secure, start the warning lights, and pull the brakes.Stabilize the tire with a tire pad or other nonskid to prevent the car from sliding.

steps2:Insert one end of the cigarette lighter plug into the car cigarette lighter, and the other end into the electric jack control handleThe 5.5 MM(FIG.1)

 steps3:Place the electric jack under the chassis bracket so that the upper plane is aligned with the car's support point plane and the screw shaft wire is aligned with the carKeep the same direction of motion; Press the inverted v key and lift the body slowly until the tire is off the groundSurface. (FIG.2)

 steps4:Loosen the tire screws one by one with an electric wrench and remove the tire. (FIG.3)

 steps5:After replacing the spare tire, tighten the nut with an electric wrench and hold the control handle down.∨ \"down key, upon jack. (figure 4)