Product name: AB glue                      Specification: 2 PCS/card

Curing time: 5~10 seconds                                                 Batch: 1 piece batch

Features: uneven surface, gap filling, strong adhesion.

Open the plastic pipe mouth with a needle. Pay attention to the drill pipe mouth, do not close to the face, do not pull or over pressure squeeze the tube body.
2. Oil, water, rust, paint oil, etc. should be removed first, and the joint surface should be consistent.
3. As long as you squeeze a small amount of 502 glue onto one side of the joint surface and press the other side, it will be glued in about 21-30 seconds. (do not apply the glue solution evenly. Do not extrude too much glue solution. Too much will affect the joint effect.)
4. After use, wipe off the excess glue of the pipe tip with dry cloth, and then cover the round bottle cap.

 [notes]
Be careful of glue dripping into the eyes and splashing into the entrance!
Keep children away from danger!
Pay attention to sticky skin and fingers!
No exposure to sunlight and high temperature areas! Please keep in a cool place