Operation

1), On/Off

Power on

Press and hold the operation button for two seconds to turn on the device, and the red light will stay on for a long time, entering the standby state.

Shut down

Press and hold the operation button for four seconds to turn off the device when the red light goes out.

2) Take photos

① In standby mode (if not in standby mode, you can turn on the power or press the operation key briefly to enter the standby state).

Point the camera at the target that needs to be photographed.

Press the operation key completely, and the red light will blink once to take a photo.

3) Video recording

① In standby mode (if not in standby mode, you can turn on the power or press the operation key briefly to enter the standby state).

Press and hold the operation button for two seconds, then release the button, and the red light will begin to flash, indicating that the machine has started to take photos.

③ If you want to stop taking photos, simply press the operation key briefly and then release it.

4) Low Battery

If the device detects a low battery state, it will save the current file, flash the red light five times, and then turn off the power.

Charging

Turn off the camera.

Connect the camera to a PC or other device via a USB cable.

During charging, the red light flashes; after being fully charged, the red light remains on continuously.

6) Portable Disk

Connect the camera to the computer in the power-off or standby state.

The 'My Computer' window shows a removable disk icon.

7) Reset

① When the equipment fails to respond due to incorrect operations or other unknown reasons, it needs to be reset.

Press the reset hole with a long and thin tool to reset it.

8) Change Time

① Change the computer's system time to the time you need to display on the camera.

Turn off the camera.

Insert the CD that came with the random into the computer's CD drive.

Use the original USB cable provided with the camera to connect the camera to the computer.

Run the time change tool on the CD.

Normal disconnect is sufficient.

9) Network Camera

Install the driver program that comes with the camera.

Camera is in a shut-down state.

Connect the camera to the computer.

"④"My computer" automatically pops up with a network camera icon.

10) Frequently Asked Questions

① Question: Why does the camera turn off after the red light flashes five times?

Answer: Check if the memory is full or the battery is in a low power state.

If the memory is full, please delete or backup the files in the memory or insert another storage card.

If you are in a low battery state, please charge.

② Problem: No response

Answer: Due to incorrect operations or unknown reasons, the device may not be able to operate. It is necessary to reset the device.

Press the reset hole with a long and thin tool.