hand coffee grinder mill coffee coffee grinder

The company is located in Yongkang, Zhejiang, in the hardware district. The store is on the 3rd floor of Area 2 of Yiwu International Trade, at Street 10, number 16972. Phone: 1351679535; Email: 50296977@qq.COM

【Material】Pine wood + iron addition + ceramic core

【Size】12.5*12.5*18.5 CM

【Weight】0..5.3 KG

【Features】

Bold and long joystick, easy to grind beans

1. Please remove the nut, the lever handle, and the L-shaped fixator in order, located in the center of the coffee grinder;
2. With one hand, lift the central screw rod, and with the other hand, rotate the gear-shaped nut piece clockwise until it is slightly tightened. Please be careful not to tighten it too much, as this may damage the internal structure of the components.
3. Put on the L-shaped fixator; the long handle end of the fixator engages with the groove of any gear-shaped nut piece, serving as the zero mark for the grinding degree;
4. Consider one groove on the gear-shaped nut piece as one cell;
5. Rotate the gear-shaped nut piece in a counter-clockwise direction by 2 to 5 steps; its grinding texture is suitable for Italian coffee machines and mocha coffee pots;
Rotate the gear-shaped nut piece in a counter-clockwise direction by 6 to 8 steps; its grinding texture is suitable for American coffee machines, hand brewing, and filter-press coffee pots.
Rotate the gear-shaped nut piece in a counter-clockwise direction by 9 to 11 steps, and its grinding thickness is suitable for a vent coffee pot (siphon pot).
6. The grind size can be fine-tuned based on personal taste and brewing habits; the above instructions are for reference only.
7. After adjusting the grinding level, place the joystick handle and nut in order and tighten them, then you can begin bean grinding;