car sticker novice car stickers sucker internship car stickers novice on the road laser reflective car stickers personality 汽车车贴 新手实习车贴 吸盘实习车贴 新手上路镭射反光车贴个性

1. Installation method for small car stickers (dry application method):

1. Clean the vehicle body and keep it dry.

2. Determine the placement where it needs to be applied. Generally, apply it slowly, smooth it with tools while removing the backing paper.

3. If the shape is really small, you can also peel off the transparent transfer film and stickers completely before pasting them. However, be careful to avoid any accidental adhesion.

4. After applying it, apply pressure several more times. Then remove the transparent transfer film.

5. Make a cut with a utility knife on the car doors and seams, then fold it inward for application.

6. Ensure there is no separation or protrusion between the car decal and the vehicle body.

2. Installation method for large vehicle decals (wet application method): Tools: cloth, water spray device, scraper, or credit card

1. Clean the vehicle body, and evenly spray water on the area where the sticker will be applied—this helps reduce the viscosity of the sticker and makes it easier to adjust the position.

2. Determine the placement where the adhesive should be applied. Apply it slowly, while gently smoothing it with tools and removing the backing paper at the same time. 3. For door handles or anti-scrape strips, cut the material as needed and wrap it properly.

4. Make appropriate adjustments. Once the overall position of the pattern is confirmed, scrape off the water and bubbles repeatedly with force. Remove the transparent transfer film.

5. Use a utility knife to make marks on the car doors and seams, then wrap them with fabric for adhesion.

6. Ensure there is no separation or protrusion between the car decal and the vehicle body.

7. Try to dry the moisture in the car decal completely; if possible, heat it up slightly for drying. Wash the car again after a day or two depending on the weather conditions.

To reduce the installation difficulty for customers, the car stickers we provide have already been coated with a transfer film in advance. (Except for the entire continuous graphics.)

1. Do not wax the car one week before deciding to apply decals; waxing will prevent the decals from sticking well. Do not wash the car within three days after applying the decals, and do not apply them on rainy or cloudy days, as the result will be poor!

2. If the sticker needs to be applied on the door gap or other movable areas, there is no need to worry. After applying it, simply cut it off with a sharp knife.

3. If you truly do not wish to take action, please go to the place where solar films are sold locally and seek assistance.