Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
|
red
红色 |
CN¥ 0.0 |
|
silver
银色 |
CN¥ 0.0 |
Chenjie Electronic Technology Co., Ltd 15yr.
Contacts Zhao Lifang Chat
Mobile 13606899076
13606899076
|
|
|
|














Precautions:
▲Warning: Do not use a hair dryer near a bathtub, sink, or other containers containing water.
▲If the hair dryer is used in the bathroom, unplug it after use, because there is still a risk even when the switch is off and it is near water.
▲To enhance protection, it is recommended to install a residual current device in the electrical circuit supplying the bathroom, with a rated residual operating current not exceeding 30MA.
RCD).
▲You must use a standard power outlet; the voltage must match the device's rated voltage.
▲When in use, the air outlet should be at least 60 MM away from hair or objects. A small amount of smoke may occur during the first use, which is a normal phenomenon.
▲When in use, do not block the air inlet/outlet or place it on soft padding such as mattresses or pillows; otherwise, if the air inlet/outlet gets blocked or clothes are blown by it for a long time,
Items may cause overheating. When overheated, the built-in automatic protection will cut off power. This does not indicate any damage; use the item only after it has cooled down.
▲Avoid dropping the hair dryer or causing it to suffer severe impacts.
▲Do not use a hair dryer near oil, gas, or other flammable materials.
▲ Children should not use this, to avoid accidents
Common Problems and Solutions
No action: The motor does not turn or the circuit is disconnected
Hot wire turns red: The hot wire has a fraying issue.
All the above issues will be sent to our maintenance department for repair.
Maintenance instructions:
★ Do not pull the power cord with force. If the power cord is damaged, stop using it immediately. To avoid danger, the replacement power cord must be provided by the manufacturer.
Specialists from the maintenance department or similar units will carry out the replacement, but no method of extension or connection to the power cord is allowed.
★ Avoid hair and other objects entering the air inlets and air outlets. If the air inlet becomes blocked, the overheat protector will automatically cut off the heating power. Please turn it off at that time.
Turn off the power, remove hair or foreign objects, and use it after the temperature has dropped.
★ Always keep the air inlet clean, but do not use solvents or oils for cleaning.
Update time:
TOP