Technical Details
1. Standard power, industrial grade, high load
2. Leak-proof adhesive design
3. Ergonomic design with a specially crafted trigger for precision and comfort.
4. Nozzle Insulation
5. Support Structure with Wide Base Design

Product Application:
1. Toy models. 2. Artificial flowers, Christmas trees. 3. Decorations, metal products. 4. Wooden products, cardboard, etc. 5. Electronic circuit boards.

Usage Method:
1. This series of products is suitable for rubber strips with diameters of Φ7mm-Φ7.5mm.
2. Insert the adhesive tape into the adhesive gun at the end, push it into the barrel, plug in the power, preheat for 2-3 minutes, then pull the trigger to extrude the melted adhesive, and you can control the amount of adhesive.
3. During use, if a whole roll of adhesive tape is not used up at one time, do not remove the tape. You can plug in the power and heat it for 2-3 minutes before using it again.

Notes
1. Use voltage: 100-240V, frequency: 50-60Hz.
2. This product is a high-temperature glue gun, and it should be used with the corresponding size of the glue tape according to the product series. If the user uses glue tape of the wrong size or type, it may cause the glue to reflux and damage the glue gun.
3. When using a hot melt glue gun, the nozzle and the melted glue are at a high temperature, so do not touch them with your hands; it is prohibited to use it in places with flammable and explosive materials.
4. When using a glue gun, do not lift it high, and the nozzle should not face up: If you do not apply glue for 15 consecutive minutes, please turn off the power to prevent the glue from melting backward and damaging the glue gun.
5. Due to the addition of durable materials in the glue gun, there may be smoke emitted during the initial use. After 30 minutes of use, the smoke will automatically disappear.
6. It should be regularly maintained to keep the gun tail slider clean to ensure that the seal can be smoothly delivered into the barrel.
7. Do not pull the glue tape out of the glue gun from the rear.
8. When the glue gun is not in use, it should be placed in a place with good ventilation and dryness, and it is prohibited to place it in a place with moisture or water. It is also prohibited to place it in a place where children or children can reach.
9. This tool must be placed on its stand when not in use.
10. Please do not replace the power cord without authorization. Only personnel who meet the relevant requirements for electrical appliance maintenance can replace the power cord.