Factory direct Sale ,If you are interest in our products ,please contact we us,we will give you best price ,our product can made under your trade mark.

Phone:18329019386

We Chat:306230336

QQ:2094586019

Whatup：15967970125

Specifications:

1, Epoxy seal 
2, Two components 
3, Fast curing 
4, Sulfur hardener

Advantage:

* Exceptional strength to handle repairs of steel, aluminum, copper, wood, glass and plastic
* Easy to use, two-part adhesive and filler, bonds and repairs almost any material
* Eliminate the need for welding or brazing
* Ideal for home and automotive use

Using Method:

1. The surface should be clean and dry, without oil or wax

2. Take down the cap, pierce the seal, squeeze out evenly (A:B=1:1). cover the surface with glue based on the mixing of the two components evenly,

3. Press it according to the actual condition.

It could achieve the using intensity after the solidifying for one hour during the normal temperature; it is suggested to operate at above 5oC.

Warning:

1. It must be even for the mixing of the two components during the adjusting of the glue. Quantity should not excess too much.

2. Tighten the caps after usage. Do not mix the cap of part A and B.

3. Wash the additional glue on the hands or the surfaces of bonding materials by alcohol before its solidifying.

4. Avoid touching with the eyes and skin directly. If getting touch with the skin, please wash them at once by using of a cloth with dipping of alcohol before solidifying, then, clean them by soap and warm water. If getting touch with the eyes, please wash them immediately with plenty of water, and see the doctor for serious situation.

5. Take strict precautions against touching by the kids and entering into the mouth.

Instruction:

• Clean the surface of the material, make sure they have no dust or oil on them.
• Mixing A and B in the proportion of 1:1 with adhesive smear, glue within 3 minutes at room temperature. Bond by the aid of fingers, set in 5 to 10 minutes. 50% of wanted strength reaches after 30 minutes. The highest strength reaches after 24 hours. 
• Fully curing needs 24 hours. Can be used at temperature of -60° ~ 100°C.

Part of our products have been displayed on the website, please contact us if you want to know more about the products.