Usage:
1. Push battery compartment cover away and install a lithium battery. The positive electrode is upward and the battery cover is inserted.
2. Press the stop button to turn off the light and connect the main body with massage pad (connect with buttons).
3. Tear off the protective film and stick the massager to the part you want to massage.
4. Press ON/INC once, then the indicator light is ON, and then press the PROGRAM button to select the required working mode. Press ON/INC again to adjust the intensity
(Please note: Every time you press some buttons, the strength will increase more, and the strength needs to increase slowly, otherwise it will be uncomfortable). Press the OFF/DEC button when you need to close or adjust the strength to weak.
5. The massage button has six working modes: massage, acupuncture, beating plaster, scraping, massage, cupping, change once every press.
6. It is appropriate to use one part for about 10 minutes every day. This machine has the automatic stop function, so there is no need to worry about the machine working for a long time without restriction.
7. If it is used in several parts of the body at the same time, please use multiple stickers.
8. At the end of the work, press the stop button. When no red light is on, remove the massage post.
9. Please stick the plastic sheet after tackiness when not in use to prevent the viscosity from decreasing.
One matcher, two lithium batteries, one butterfly sticker.
Note:
there are some small requirements for this model
Press twice when operating
When pressing the first button, the indicator light will be on
That's the power button
Only when the patch touches the skin can it work
There are two situations:
First: The operation is incorrect. Press the boot twice to enter normal.
