[Product name]: double tip 5050

[Product voltage]: 12V DC (that is, the output voltage of General cars)
[Product use]: reading lights, license plate lights, roof lights, door lights, Car tail light, side turn signal, etc.
[Product light color]: white, blue, red, green color, yellow

[Product size]: 31-41mm

[Product weight]: 5g
               
[Sex has characteristics]]:
1. The product adopts imported SMD chip, and the ultra-thin plate-shaped design makes the installation fit better and the illumination more uniform, thus avoiding the disadvantage of poor exposure width caused by the dot-shaped light source; The product is suitable for 10-13v voltage. This SMD product has the characteristics of light source diffusion, wide-angle irradiation and high lumen;
2. Lighting without delay, high light purity, strong color rendering and penetration;
3. LED light-emitting diode is adopted, which consumes less power and can better protect the car circuit;
4. LED has no filament, good heat dissipation, small current, small calorific value, and the vehicle circuit is not easy to oxidize;
5, strong earthquake resistance, low temperature rise, is a new generation of revolutionary solid-state light source;
6. Suitable for direct flow 10-13v.
[Product Note]]:
No need to modify the circuit, directly replace the original traditional glass bulb, pay attention to the original bulb temperature is relatively high, to prevent burns!
Refer to the product shape and size when installing. Pay attention to the size of the installation position space. Press it carefully and do not squeeze the LED chip to avoid damage. The LED has Positive pole and negative pole. If it is not bright, reinstall it in the turning direction