wood turning tool suit brazed carbide turning tool 11pc turning tool suit for cross-border e-commerce

Welding Cut-off Tools: As the name suggests, welding cut-off tools are connected by welding the blade part and the body part. Through the use of solders such as dehydrated borax, copper sheets, manganese steel, glass powder, and other materials, they are melted at high temperatures to allow alloys, high-speed steel, cubic boron nitride, diamond, and ceramic blade materials to adhere to the same groove-shaped knife shaft, meeting the requirements of machining operations. The most widely used welding cut-off tools at present should be hard alloy welding cut-off tools, as hard alloys have higher hardness and can meet the requirements of most processed materials. Moreover, the cost is relatively low compared to other materials, so they are widely used. YT15 has a hardness of 91, suitable for semi-finishing and finishing continuous cutting of carbon steel and alloy steel, as well as semi-finishing and finishing cutting when cutting in bursts. YT14 has a hardness of 905, suitable for roughing when cutting uneven surfaces of carbon steel and alloy steel, semi-finishing and finishing cutting when cutting in bursts, rough milling of continuous surfaces, and drilling of cast holes. YT5 has a hardness of 89.5? Suitable for carbon steel and alloy steel (including forged parts, stamping parts, and cast skin) when cutting uneven surfaces. Rough turning, rough planing, semi-finishing planing, rough milling, etc.? YG6 hardness 895 is suitable for semi-finishing and light load rough processing of cast iron, non-ferrous metals, heat-resistant alloys, and titanium alloys.? YG8 hardness 890? Suitable for rough turning, rough planing, rough milling, and general hole and deep hole drilling and expanding of cast iron, non-ferrous metals and their alloys, and non-metallic materials with uneven surfaces and intermittent cutting.? YW1 hardness 915? Suitable for processing difficult-to-machine steel materials such as heat-resistant steel, hard steel, stainless steel, and alloy steel, as well as for processing of ordinary steel and cast iron.? YW2 hardness 905 is suitable for semi-finishing and light load rough processing of stainless steel and alloy steel.? YS25 hardness 905? Suitable for rough turning of carbon steel, cast steel, high manganese steel, high strength steel, and alloy steel.