Yiwu Green Nest Daily Chemical ProductsThe Limited Liability Company is a professional production and processing company for pest control products such as fly repellent and mouse glue. The company is located in Dongyang, Yiwu City, Zhejiang Province, China. Yiwu Green Nest Daily Chemicals Co., Ltd. has a complete and scientific quality management system. The integrity, strength, and product quality of Yiwu Green Nest Daily Chemicals Co., Ltd. have gained recognition in the industry. We warmly welcome friends from all walks of life to visit and guide Yiwu Green Nest Daily Chemicals Co., Ltd.
Contact: Zheng Ping'er
WeChat: alena0522
Contact Number: 13957901711
1. Product Features
Aladyte is a two-component, fast-curing transparent epoxy resin adhesive that cures at low temperature or room temperature, with a fast curing speed. After curing, it has high bonding strength, good hardness, and a certain amount of toughness. The cured product has good resistance to acid and alkali, excellent moisture-proof, water-resistant, oil-proof, and dust-proof performance, and is resistant to heat and humidity and atmospheric aging. It has good electrical insulation, compressive strength, and adhesion strength, and other physical properties.
Section Two: Scope of Application
1. All electronic products or other products that need to be quickly bonded and fixed can be used;
2. Widely used in the adhesion and fixation of electronic components and crafts, gifts, for the encapsulation bonding between metals, ceramics, wood, glass, and hard plastic materials, it has excellent bonding strength;
3. Not suitable for adhesive bonding of elastic or soft material products.
Part 3: Product Name and Model
|
Product Model
|
AB Ratio
|
Use Time
|
Curing Time
|
|
605-5
|
1:1
|
3 minutes
|
5-8 minutes
|
|
605-15
|
1:1
|
5 minutes
|
10-15 minutes
|
|
605-30
|
1:1
|
10 minutes
|
20-30 minutes
|
|
605-60
|
1:1
|
20 minutes
|
40-60 minutes
|
|
605-120
|
1:1
|
40-60 minutes
|
90-120 minutes
|
|
605-240
|
1:1
|
90-120 minutes
|
210-240 minutes
|
Note: Full curing requires 24 hours.
Section 4: Usage Method
1. The area to be adhered and sealed must be kept dry and clean.
2. Measure the amount according to the ratio, and mix the A and B agents thoroughly to avoid incomplete curing;
3. After mixing thoroughly, please immediately inject the glue and use it as much as possible within the usable time;
4. During the curing process, please clean the containers and utensils used in time to prevent the glue from hardening on the tools and items.
5. Safety Precautions
1. This product will begin to solidify after mixing, and its viscosity will rapidly increase, along with the release of heat;
2. Note: The product cures very quickly, so please try to reduce the amount of adhesive mixed at one time! The more adhesive mixed together, the faster the reaction will be, and the faster the curing speed will be, and it may also accompany the release of a large amount of heat. Please pay attention to controlling the amount of adhesive mixed at one time, because the reaction will accelerate, and the usable time will also be shortened. The mixed adhesive liquid should be used as much as possible within a short time;
3. A very small number of people may experience mild skin allergy after prolonged contact with adhesive liquid, with mild itching and pain. It is recommended to wear protective gloves when using the adhesive and, if it sticks to the skin, use acetone to remove it and clean the area with a cleaner.
4. Before using in large quantities, please first try a small amount to master the product's usage techniques, to avoid any mistakes.
