YG3XAmong tungsten-titanium alloy, the wear resistance is the best, but the impact toughness is poor.
YG3The wear resistance is second only to YG3X, and is sensitive to impact and vibration. It is suitable for the fine car, the fine car thread and the reaming hole in the continuous cutting of cast iron non-ferrous metal and its alloy
YG6AIt is a fine grain alloy with good abrasion resistance, suitable for semi-finishing of cold hard cast iron, non-ferrous metal and its alloy, and also suitable for semi-finishing and finishing of broken fire steel alloy steel.
YG6XAs a fine grain tungsten carbide alloy, it has higher wear resistance than YG6, and its service strength is similar to YG6 alloy.
YG6High abrasion resistance, but lower than YG3, better shock and vibration resistance than YG3X. Suitable for semi-finishing and finishing of cast iron, non-ferrous metal and alloy, non-metallic materials with medium cutting speed.
YG8High strength, shock resistance, better shock resistance than YG6, but low abrasion resistance and allowable cutting speed. Suitable for low speed roughing of cast iron, non - ferrous metal and alloy.
YD201Suitable for semi-finishing, roughing and milling of cast iron and light alloy.
Update time：20180711130410
